2019 Spring Meeting and 15th Global Congress on Process Safety

Session: GCPS Poster Session

Co-Chairs

LaFond, M., The Dow Chemical Company
Shaikh, I., Chevron

Presentations

05:00 PM

(55al) Reducing Industrial Risk in a Converging It/OT World: 20 Experts Share Their Strategies
Cappi, N.
(55ai) CFD Simulation of the Effect of Wind Speed and Release Elevation on Dispersion of Flammable Fluids at LNG Export Facilities
Aguilera, C., Marsegan, C., Mitra, S.
(54r) The Effects of Oxygen Enrichment on the Explosibility Properties of Flammable Gases and Vapors
Prugh, R.
(55am) The Intersection of OT Security and Process Safety
Cappi, N.
(55bd) Process Safety and Hyperloop Transportation
Sutton, I.
(55bm) The Application of Bowties for a Robust PSM Program
Pierce, M.
(55ca) "Identifying Critical Process Parameter to Ensure Asset Integrity" or "Pulse of Mechanical Integrity Management System"
Raheem, A.
(55bh) Analysis of Chemical Effluent Discharge through the Emergency Relief System Using Steam-Water Properties
Ozar, B., Conzen, J., Stefanczyk, D.
(55cm) The Process Safety Analysis and Management System in Sinopec
Jiang, X.
(55b) Applying PSM in Vaca Muerta Shale Oil & Gas Operations: The Experience
Monteiro, F., Fellner, E.
(55az) Emerging Trends in Process Safety Management Relating to Contractor Workforce Compliance
Perrett, G.
(55bn) Advance Alarm Management Applied to DCS Improvement in a Petrochemical Plant: A Case of Study
Campo Castrillón, E. D. J.
(55cb) The Process Safety Analysis and Management System Based on Safety Reliability
Jiang, X.
(55bo) Overcoming Motivational Biases in Hazops
Grant, K., Tze, S., van Lindenberg, J., Kang, M., Sherwin, E.
(55be) Chemical Process Safety Requirements of the Fire Code
Melucci, R.
(55ba) Análisis Cuantitativo De Riesgo (QRA) Como Herramienta Para La Toma De Decisión Sobre La Infraestructura En Sistemas De Transporte De Fluidos Peligrosos
Moncada, D., Montoya, M.
(55aq) Flares Are the End of the Line; How to Permit Correctly
Vallavanatt, R.
(55cc) Process Hazard Analysis
Turk Eski, G.
(55v) Most Common Process Safety Management Gaps Based on Occupational Safety and Health Administration Process Safety Management of Highly Hazardous Chemicals Violation Trends
Persechino, J.
(55ac) Analysis of European OIL and Gas Industry Accidents By Statistical Modelling of Human and Organisational Factors
Bassey, B., Ajare, T. O.
(55ab) Studying the Dependence of Operator Performance on Step Level Complexity
Harhara, A., Ade, N., Parker, T., Quddus, N., Peres, S. C., Mannan, M. S.
(55j) Using the Risk Analysis Screening Tool (RAST) in Process Design to Manage Risk
Ness, A., First, K.
(55bx) Maintaining Safety Excellence By the Implementation of Process Safety Inspection in Badak LNG
Laksamana, A. S.
(55p) Flammable Gas Release Modeling for Real-Time Analysis Using Adversarial Variational Bayes
Lee, C. J., Gye, H. R., Na, J., Seo, S. K.
(55bi) Evaluation of the Thermal Stability of Styrene in Contact with Impurities
Zhao, L., Papadaki, M., Akbulut, M., Mannan, M. S.
(55bg) Industrial Process Safety By Collaboration of Safety Instrumented System and Dynamic Simulator
Ando, T., Yamashiro, Y.
(55ae) Risk Analysis Screening Tool – CCPS Project 280
Ness, A., First, K.
(55ag) Study of the Effects of Wind Speed and Surface Roughness Under Stable Atmospheric Condition Using Aloha Model and CFD Model
Zhu, J., Laboureur, D.
(55g) Practical Notes on Ragagep Compliance
Busby, K., Kazarians, M.
(55aw) Process Safety in Oil Refineries: Vacuum Distillation Column Hazop Study
Do?an, B.
(55ad) Prevent Them All or Stop Them Small: Tripod Best Practices in Reducing Chemical Accidents and Enhancing Response Preparedness
Lawrence, K., Jones, J. L., Smith, G.
(55k) Integrating Process Safety into Process Design from Initial Concept through Start-up
Heil, J.
(55z) Strengthening Process Safety Culture throughout Learning from Each Other's Vulnerabilities
PoliSilva, L.
(55af) Impacts of Climate Change on Process Safety Management in Oil and Gas Operations
Nwankwo, C.
(55av) Experimental Study of Electrostatic Hazard inside Scrubber Column Using Response Surface Methodology
Yue, S., Wang, J., Gao, X., Wilhite, B. A., Mannan, S. M.
(55m) Controlling Static Discharge Using Antistatic Additives
Rigby, A., Zabiegala, A., Logue, S.
(55y) Lessons Learned from Analyzing an Explosion Accident at Shanghai Secco Chemical Plant
Dong, H., Liu, Y., Zhao, D., Chen, J., Wang, Y., Wang, W.
(55bb) Best Practice in MOC and Pssr Automation for Opex
Bearrow, M.
(55t) Process Hazard Analysis (PHA) Preparation: A Role Based Optimization
Frizzell, S.
(55at) A Basic Review of Fundamental of Thermodynamics and Its Application in the Analysis of Consequences and Accident Investigation
Medrano, M. A.
(55bp) Integrating Culture into Process Safety Assurance
Mohd Noor, N. A.
(55br) Moving Back to Flammable Refrigerants - Facility Siting and Personnel Safety Considerations
Hart, R., Morrison, D.
(55ay) API Process Safety Site Assessment Program - Trends and Good Practices in Process Safety
Broadbent, A., Meng, R. D.
(55bw) De-Mystifying the Concepts of Hazardous Area Classification
Johnston, J. E., Eccleston, C. A.
(55bz) Using HAZOP/LOPA to Create an Effective Mechanical Integrity Program
Maher, S. T., McVey, M.
(55u) Building Process Safety Intelligence: What Should Every Graduating Chemical Engineer Know?
Christe, D., Caligaris, M.
(55cl) Events Report Database Analysis for SHE/PSM Programs Improvements
Campo Castrillón, E. D. J., Ojeda Delgado, K. A.
(55q) Modeling and Analysis of Flammable Gas Dispersion and Deflagration from Offshore Platform Blowout
Li, X., Chen, G.
(55aa) Development of Human Reliability Analysis Method for Oil and Gas Operations
Ramos, M., Major, C., Mosleh, A., Ekanem, N.
(55bt) Ammonia Dispersion Modeling for Ammonia Storage with Multi-Scenario Failure System
Adhytama, V. P., Failaka, M. F., Andiwijaya, A. F.