2012 Spring Meeting & 8th Global Congress on Process Safety

Session: Poster Session

Chair

Co-Chair

Zhang, S., Mustang Engineering, L.P.

Presentations

05:00 PM

(104e) The History of the Process Plant Safety Symposium
Edwards, V. H.
(104b) Detonation of A Gaseous CHARGE In A Confined and SEMI-Confined Workshop
Sochet, I.
(104ak) Plant Safety Through Process Control
Soliman, M.
(104al) Hydrogen Fluoride Alkylation in Oil Refineries: A Survey of Union Safety Representatives
McQuiston, T., Nibarger, K., Wright, M.
(104be) “Explosibility Index” – Extension to Dust-Explosion Protection
Prugh, R.
(104bp) Quantitative Risk Assessment Study of Hydrogen Cyanide handling areas of Acrylonitrile Plant
Sarkar, P.
(104cc) A Method of relief ability evaluation in fire condition of gas gaterhing station
Fu, J.
(104l) Explosion In An HMX (Octogen) Plant
Held, M.
(104cd) Prevention and control of H2S during bad oil processing
wendong, W.
(104bf) Preventing Runaway Polymerization of Vinyl Acetate in Storage Vessels
Jiang, J.
(104ce) A new type of fire suppressant powder of KHCO3/ã-Al2O3 nanocomposite
Liu, Y.
(104m) Things Plant Engineers Should Know about Reviewing Relief Valve and Flare Action Items
Smith, D. J.
(104cf) Risk visualization software of fire and explosion in chemical industrial area
Xinmei, Z.
(104bq) Early Lessons From PSM Implementation
Lee, J., Bailey, D. E.
(104ca) An effective method to control dangerous petrochemicals storage tank hazard
Zhao, D.
(104n) Quantifying LOPA Uncertainty
Freeman, R.
(104cb) Fire and explosion domino effect evaluation on pressurized spherical tank
Wang , X., Wang , X.
(104an) Aerosol Flammabiltiy Study of Heat Transfer Fluid: Flammable Regions, Flame Development, and Ignition Delay Modeling
Huang, S. Y., Li, X., Mannan, D. M. S.
(104bz) Comparison of degassing tank electrostatic discharge hazard during the expansion of polyethylene unit
Liu, Y.
(104bg) A Review of Liquid Discharge Models Under Non-Steady or Transient Conditions for More Realistic Predictions of the Magnitude and Impact of Consequences Related with Loss of Containment Events
Medrano-González, M.
(104ao) Using a Process Simulator to Improve Relief System Analysis
Malone, D. P.
(104am) Driving Operational Discipline Through Quality Written Procedures
Rains, B. D.
(104bt) Avenue for Excellence in Relief Valve Testing Program
Almowalad, Y.
(104r) Research and Implementation of Management Tools Used to Reduce Human Errors in Petrochemical Industry
Xiaohua, Z.
(104s) Standardization Process Safety Analysis Information Based on Knowledge Ontology
Weihua, Z.
(104t) Development of Process Safety Management Platform Based on Cloud Computing
Chuankun, L.
(104bm) Design Optimization of Storage Facilities Taking Into Account the Domino Effect
Bernechea, E., Arnaldos, J.
(104bd) Multi-Objective Optimization of Hazardous Substance Storage Facilities. the Decision Between Risks and Costs Associated to the Project
Bernechea, E., Arnaldos, J., Zamarripa Perez, M. A.
(104u) Safety Instrumented Systems - the Operational and Maintenance Phase
Watson, K.
(104ap) Experimental and Computational Fluid Dynamics (CFD) Studies of Deflagration to Detonation Transition (DDT)
Rosas, C., Mannan, D. M. S., Petersen, D. E., Nayak, D. S.
(104bi) Reducing the Systemic Risks of Human Error Through Root Cause Analysis
Marullo, J. F.
(104h) Study of the Effects of Obstacles in LNG (Liquefied Natural Gas) Vapor Dispersion Using CFD Modeling
Ruiz Vasquez, R., Nayak, D. S., Mannan, D. M. S.
(104f) Normalization of Process Safety Metrics
Wang, M., Mentzer, R., Mannan, D. M. S.
(104aq) Release and Dispersion of Heavy Gases - Experimental Results and Numerical Simulations
Rauchegger, C., Schröder, D. V., Lohse, D. V., Thévenin, P. D. D.
(104v) Using Simulators to Teach Process Safety and Operations At Petroplus Coryton
Munn, L., Glaser, D. C., Williams, J.
(104g) Optimal Layout of Gas Detector Networks: A Comparison Study
Benavides-Serrano, A., Laird, C. D., Legg, S., Mannan, D. M. S.
(104ax) Back to Basics
Bizzotto, Sr., P. E., Zunana, P. R.
(104bj) Preparedness for the Initial Moments of a Process Safety Incident
Bizzotto, Sr., P. E., Zunana, P. R.
(104x) PFD for SIF: Accounting for Systemic Human Error in SIS
Bridges, W., Thomas, H. W.
(104z) Risk-Based Inspection As a Tool for Managing Risks - Beyond Inspection Plans
Aguilar-Otero, J. R. Sr., Lopez-Ojeda, L.
(104aa) Industry and Regulators Working Together in Preventing Accidents
Cheung, C. N., Sawyer, R.
(104ay) Safety and Safety-Instrumented System (SIS)
Alauddin, T., Saqlain, C. J.
(104az) Pressure Relief System Reaction Forces – the Importance of Evaluating Existing Installations
White, J. F., Smith, D. J., Frenk, B., Cristea, N. N.
(104as) Methodology for Uncertainty Reduction for FDS Simulations to Obtain Refined Results for Performance-Based Design
Cadena, J. E., Munoz, F.
(104ab) Facility Layout Optimization Detailed Research Through MILP and MINLP
Cadena, J. E., Munoz, F., Gomez, J. M., Ramos, M.
(104j) Explosibility of Methane-Corn Hybrid Mixtures
Jiang, J., Castellanos, D., Carreto, V. H., Mannan, D. M. S.
(104ac) Trending Risk: Using Lagging Data to Develop Leading Indicators for Managing PSM Health
Neil, M.
(104ad) How to Go From “Lesson” to “Learned”: Systematic PSMS Benchmarking to Drive Learning
Cravens, R., Pridy, C.
(104d) Benefits of CFD for Onshore Facility Explosion Studies
Davis, S. G., Gavelli, F., Hansen, O. R.
(104ae) Using Research-Vetted, Actionable Leading Indicators to DRIVE Safety Performance and Operational Excellence
Stough, J.