2023 AIChE Annual Meeting

Session: Meet the Faculty and Post-Doc Candidates Poster Session

Chair

Roman Voronov, New Jersey Institute of Technology NJIT

Co-Chair

Sundararajan Madihally, Oklahoma State University

Presentations

01:00 PM

(2ca) Enabling and Sensing Technologies for Healthcare, Environmental Monitoring, and Disease Control
Mohammad Mofidfar
(2ko) Numerical Simulations of Multiphase Flows
Ricardo Constante-Amores
(2kp) Electrochemical Upgrading of Small Molecules Via Catalytic Microenvironment and Active Site Tuning
Sunmoon Yu
(2kq) Modeling of Eicosanoid Class Switch during Arachidonic Acid Metabolism in Mouse Macrophage Cells Using the Cybernetic Framework
Sana Khanum, Shakti Gupta, Mano Maurya, Shankar Subramaniam, Doraiswami Ramkrishna
(2ks) Direct Electrosynthesis of Ammonia from Nitrate Reduction Reaction Via Catalyst Design and Electrolyzer Engineering
Feng-Yang Chen, Haotian Wang
(2ku) A Systems Approach Towards Reconciling Single-Cell Heterogeneity and Cell Phenotype in Health and Disease
James Park
(2kv) Electrifying the Chemical Industry Towards a Sustainable Future
Rong Xia
(2kw) Migrating Solvation Structures in Li-Ion Battery Electrolytes Revealed By Electrophoretic NMR
David Halat, Julia Im, Chao Fang, Aashutosh Mistry, Saheli Chakraborty, Darby Hickson, Venkat Srinivasan, Rui Wang, Nitash P. Balsara, Jeffrey A. Reimer
(2ky) Atomic-Level Design of Sustainable Nanomaterials for Greenhouse Gas-Energy-Climate Nexus
Haiyan (Christina) Mao
(2kz) Exploring the Frontiers of Biotherapeutic Production: Harnessing the Power of Host Diversity, Coculture for Advancing Live Biotherapeutic Development, and Biocatalysis
Priyanka Nain, Anurag Rathore, James Gomes, Aditya Kunjapur
(2lb) Influence of Neutral Comonomer Side Chain Length on Transport and Co-Transport of Carboxylates and Alcohols in PEGDA-Based Membranes
Antara Mazumder
(2bu) Advanced Polymer-Derived Membranes for Pre-Combustion CO2 Capture and Blue H2 Production
Leiqing Hu, Haiqing Lin
(2by) Harvesting Cultivated Meat Grown in a Bioreactor with a Low Shear Centrifuge. Centrifuge Is Either Single Use or CIP/Sip.
David Richardson
(2kn) Catalyzing the Future: Creating a Confined Environment for the Production of Sustainable Chemicals
Honghong Shi
(2cc) Excipient-Based Strategy for Engineering Stable Ultraconcentrated Insulin Formulation
Yanxian Zhang
(2ce) Strain-Stiffening Modular Gels with Dynamic, Secondary Cross-Linking
John Klier, Sonu Kizhakkepura, Shelly Peyton
(2ci) Biological Upcycling of Wastes for Sustainable Development
Jinjin Diao, Tae Seok Moon
(2cl) Conversion of END-of-Life Waste Streams to Low Carbon Fuels and Materials in a Circular Economy MODEL
Emmanuel Galiwango, P.Eng., James Butler, Ma Weiguo, Samira Lotfi
(2cn) Systems Engineering for Manufacturing of Advanced Biotherapeutics
Francesco Destro
(2cr) Innovating Light-Matter Coupling at the Nanoscale Interfaces
Jingang Li
(2ct) Molecular Engineering and Structural Design of Polymeric Materials for Energy-Water-Environment Nexus
Youhong (Nancy) Guo
(2cz) Physics-Informed Material Discovery Tools for Energy and Space Applications
Maitreyee Sharma Priyadarshini
(2df) Advancing Health and Sustainability through Multiscale Computational Modeling of Soft Materials
Zhiqiang Shen
(2dh) Investigation of the Impact of Sidechain Comonomer in the Ion Exchange Membrane (IEM) on the Electrochemical Cell Device Performance.
Antara Mazumder
(2dj) Transport Phenomena and Materials Design in Electrochemical Renewable Energy Storage
Daniel G. Nocera, Zhifei Yan
(2hy) NON-Oxidative Catalytic Cnversion of Methane into Benzene over Hierarchical Mo/HZSM-5 Catalyst
Deepti Mishra, Kamal Pant, Muxina Konarova
(2gb) Inverse Design of Complex Flow Systems Using Theory and Differentiable Direct Numerical Simulations
Mohammed Alhashim
(2fp) Quick-Release Antifouling Hydrogels for Solar-Driven Water Purification
Xiaohui Xu, Rodney Priestley, Sujit Datta
(2ll) Meet the Candidate: Yoorae Noh – Sustainable Eco-Friendly Plastic Manufacture, Recovery, and Management
Yoorae Noh
(2lm) Rapidly Ordered Block Copolymer Membranes with Tunable Pore Sizes for Wastewater Treatment
Kshitij Sharma, Maninderjeet Singh, Chenhui Zhu, Alamgir Karim, Mohammad Hassan
(2lc) Accelerating the Advancement of Functional Nanomaterials for Clean Energy Applications
Chaochao Dun, Jeffrey J. Urban, Mark Swihart
(2le) Complex Modeling in Biology: Studying Intracellular Entry in the Past and Aging in the Future
Xinxin Wang
(2lf) Quantifying Exosomes, Supermeres and Lipoproteins Subfractions for Early Detection of Cancer and Cardiovascular Disease
Sonu Kumar, John Sinclair, Nalin Maniya, Satyajyoti Senapati, Hsueh-Chia Chang
(2lh) Nanoscale Thermodynamics in Liquids and Soft Materials
Xingfei Wei
(2li) Utilizing Microbial Communities for Valorization of Waste Carbon
Bradley Biggs, Manoshi Datta, Isra Raza, Markus de Raad, Trent Northen, Adam P. Arkin, Morgan Price, Hans K. Carlson
(2fr) Microgel Surface Engineering to Enhance Cell Adhesion and Porosity of Injectable Granular Hydrogel Tissue Scaffolds
Jing Liu, Katie Li-Oakey, John Oakey
(2ft) Stimuli-Responsive Complex Fluids and Anisotropic Materials
Tadej Emersic
(2lw) Mathematical Model of the Dezincification Behavior for the Commercial-Scale Rotary Hearth Furnace
Moon-Kyung Cho, Myungwon Jung, Jinsu Kim, Young-Seek Yoon, Jeeeun Kim
(2fz) Leveraging Immunoengineering for Vaccine and Therapeutics Design
Duo Xu
(2lk) Processing-Structure-Property Relationships for Anisotropic Soft Materials
Kushal Bagchi
(2gd) Atomic and Molecular Design of Materials for Sustainable Energy Storage Solutions
Julia Yang
(2gf) Probabilistic Prediction Model-Based High-Throughput Screening for Discovering Feasible and Effective Catalysts for Dry Reforming of Methane
Jiwon Roh, Hyundo Park, Hyungtae Cho, Junghwan Kim, Insoo Ro
(2gh) Exploring the Frontiers of Molecular Diffusion through Machine Learning-Based Forcefields and Electron Density Predictors
Siddarth Achar, Karl Johnson
(2gj) Simulation-Aided Energy and Economic Evaluation for Amine-Based CO2 Capture Matching Existing Power and Industrial Processes
Koki Yagihara, Hajime Ohno, Kazuki Fukushima, Yasuhiro Fukushima, Jialing Ni
(2gl) Bio Soft Materials for Advance Applications
Diego Gomez-Maldonado
(2gn) Improving Biological Molecule Delivery through Understanding the Endomembrane System
Ryan Splichal
(2ki) Sustainable Material Design through Machine Learning and Computer Simulations
Ludwig Schneider
(2kj) Dynamic, Remote-Controllable Electroactive Hydrogel Waveguide Architectures
Oscar Alejandro Herrera Cortes
(2kk) Rational Design Approaches and Engineering Effective and Stable Targeted Delivery Systems and Formulations for RNA Therapeutics
Talia Shmool
(2kl) Multi-Phase Ge(GeOx)/T-Nb2O5-X/C Composite with Synergistically Improved Electrochemical Performance Toward Lithium Storage
Wei Tao, Byungchan Han