2023 AIChE Annual Meeting

Session: Meet the Faculty and Post-Doc Candidates Poster Session

Chair

Voronov, R., New Jersey Institute of Technology NJIT

Co-Chair

Madihally, S., Oklahoma State University

Presentations

01:00 PM

(2gd) Atomic and Molecular Design of Materials for Sustainable Energy Storage Solutions
Yang, J.
(2is) Effect of the Concentration of Brönsted and Lewis Acidic Sites on the Main Reaction Pathways during the Conversion of Fructose over Sn-KIT-6-PrSO3h Bifunctional Catalyst
Tututi, E., González, H., Aída, G. A., Rico, J. L.
(2cq) From Causal Discovery to Multiscale Modeling in Biological Signaling Networks
Gregg, R.
(2mg) Transforming cell therapy manufacturing and cancer management with large-volume microfluidics
Mishra, A.
(2be) Multiscale Computational Design of Polymeric Materials for Sustainability and Healthcare
Liang, H.
(2ib) Rheological (Structural) and Interfacial Properties of Emulsions and Foams for Environmental Applications
Zhou, M., Foudazi, R.
(2bb) Synthesis, Characterization, and Analysis of Non-Linear Polymers for Medicine
Cui, Z.
(2mh) Empowering Health through Engineering: Utilization of Drug Delivery and Nanotechnology Towards Improved Health Equity
Lanier, O.
(2fl) Jonathan Soucy: The Nerv Lab Will Excite Learning
Soucy, J.
(2dv) Bridging Physics-Informed and Data-Driven Materials Designs for Deep Decarbonization
Peng, J.
(2he) Faculty and Post-Doc Candidate: Dr. Yaprak Ozbakir
Ozbakir, Y.
(2bu) Advanced Polymer-Derived Membranes for Pre-Combustion CO2 Capture and Blue H2 Production
Hu, L., Lin, H.
(2jn) Creating a Toolbox for Studying Soft Material Self-Assembly and Dynamics
Mysona, J.
(2ga) Active Matter and Liquid Crystals Under External Fields: Basic Science and Applications
Tavera-Vazquez, A.
(2ek) Nano-Bio Interface Engineering with Precise Polymeric Nanostructures
Yu, B.
(2bf) Developing Workflows to Understand and Design Complex Alloy Catalysts Using Density Functional Theory, Machine Learning, and Catalysis First-Principles
Deshmukh, G.
(2cs) Build It up and Break It Down: Synthetic Biology and Biochemical Engineering for Sustainable Chemical Production and Bioremediation
Adams, J. D.
(2mi) Advancing Switchable Solvents for the Sustainable Water Reuse and Desalination Applications
Shah, K.
(2bg) Computation and Theory-Guided Materials Discovery and Design for CO2 Capture, Utilization, and Storage
Yoon, B.
(2ic) Adhesion of Wet, Compliant and Rough Soft Materials
Karnal, P.
(2kg) Extending Automatic Reaction Mechanism Generation to Complex Systems Using Machine Learning and Computation
Johnson, M. S.
(2jo) Integrating Molecular Science with Systems Engineering to Drive Sustainable and Circular Economy
Bhalode, P.
(2gf) Probabilistic Prediction Model-Based High-Throughput Screening for Discovering Feasible and Effective Catalysts for Dry Reforming of Methane
Roh, J., Park, H., Cho, H., Kim, J., Ro, I.
(2it) Immunoengineering Strategies for Neurological Diseases
Liao, R., Nance, E., Mitragotri, S.
(2mj) Extending a Microfluidic Platform to Elucidate Bacterial Communication in humans its impact on disease
Jackman Burden, C.
(2l) High Density Soft Electronic Fibers
Khatib, M.
(2ie) Electronic Waste Derived Three-Dimensional Carbon Aerogel for the Adsorption of Phenol from Wastewater
Jain, M.
(2kh) Advancing Catalyst Design through Insights from Computational Modeling
Mandal, S. C.
(2em) Overcoming Transport Barriers in Fluid-Solid Physical and Chemical Processes
Vallace, A.
(2cu) Understanding Gas Transport in Novel Membranes for Energy-Efficient Gas Separations: Polymers, Carbon Molecular Sieves, and Metal-Organic Frameworks
Yu, H. J.
(2mk) Electrochemistry Nano Laboratory (Echem NanoLab): Wearable sensing platforms for continuous health monitoring
Lorestani, F.
(2dx) Rational Design of Sustainable Chemical Solutions with Reaction Networks and Data Science
Spotte-Smith, E.
(2hf) Cellulose Based Anti-Fouling Coatings for Application in Medical Devices.
Walker, E.
(2by) Harvesting Cultivated Meat Grown in a Bioreactor with a Low Shear Centrifuge. Centrifuge Is Either Single Use or CIP/Sip.
Richardson, D. Sr.
(2jp) Multi-Level Simulation Driven Discovery of Correlated Materials for Carbon Capture, Biomimetic Catalysis, and Quantum Information Science
Boyn, J. N.
(2gc) Elasticity Induced Dynamics of Complex Fluids and Filaments
Kumar, M.
(2ld) Catalyst Optimisation and Design for Heterogeneous Reaction Systems
Shambhawi, S.
(2bh) Alkalide-Assisted Direct Electron Injection for the Noninvasive n-Type Doping of Graphene
Park, S., Lee, C. Y.
(2cw) Chemical Systems Engineering for Water Solutions & Bioproducts Manufacturing
Aguda, R.
(2ml) Creating Advanced Therapeutics and Applications in Enzyme-Controlled Spatiotemporal Technologies
Huang, Z., Szablowski, J.
(2n) Advancing Biomass As Renewable Energy: Investigating Syngas Inhibition, Reaction Rate, and Reactor Simulation for Enhanced Hydrogen Production Via Steam Gasification
Kim, J.
(2bi) Extremophile Stress Proteins for Engineering Novel Properties in Living Cells and Biomaterials
Lim, S.
(2hh) Big Data Analytics for Disease Systems Biology and Bioprocess Engineering
Gopalakrishnan, S.
(2ge) Multi-Fidelity Computer-Aided Molecular Design
Greenman, K. P.
(2gh) Exploring the Frontiers of Molecular Diffusion through Machine Learning-Based Forcefields and Electron Density Predictors
Achar, S., Johnson, K.
(2iu) Theoretical and Computational Approaches for Upscaling Nanoengineered Materials to Design High Strength Polymeric Structural Materials
Gupta, N.
(2mm) Interfacial Engineering for Plasmon-Enhanced Nanomaterials for Energy Conversion and Biosensing applications
Tufa, L., Lee, J.
(2if) Chemical Conjugation Strategies for Functional Intracellular Delivery of Protein Therapeutics
Alamgir, A.
(2b) Machine Learning Based Meta-Analysis of the Association between HLA-Peptide Binding Interactions and HLA-Linked Disease Susceptibility
Kieslich, C., Song, H.
(2gg) Heterogenization of Metallocene Catalysts over Surfactant Modified Layered Double Hydroxide Sheets for Efficient Olefine Copolymerization.
Mazhar, H., Al-Harthi, M. A.