1998-Process Plant Safety Symposium

Session: TECHNICAL PAPERS

Presentations

Technical Aspects of the East Harris County Manufacturers Association Program for EPA RMP Implementation
Anderson, S., Coe, J.
The East Harris County Manufacturer Association’s Pilot Chlorine Work Group’s Strategy & Findings
Process for Developing Offsite Consequence Guidelines for Complying with EPA’s RMP Requirements
Hodges, R.
EHCMA Technical Committee: Propylene and All Flammables Work Groups
RAVEM - A Pilot-Scale Runaway and Venting Module
Duh, J.
Combined Audits
Malkewicz, P.
DuPont’s Approach to PSM Auditing
Thompson, J.
Measuring Upstream Performance Indicators for Process Safety
Burns, T.
What is Involved in PHA Revalidation
Malkewicz, P.
Trade Secrets in PHA Revalidation
Alderman, J.
Using Computer-Based Analytical Tools to Improve the Design of Blast-Resistant Facilities
Whitehouse, S., Newell, R., Steinborn, T.
Application of Qualitative and Quantitative Risk Analysis Techniques to Building Siting Studies
Cornwell, J., Marx, J.
Building Damage Load Tables - What Do They Mean?
Sawruk, D.
Advanced API RP-752 Building Siting Analyses – A Prototype
Moosemiller, M., Brown, B., Greenwood, B.
A Case Study: The Plaintiff’s Perspective on the Use of PSM and RMP Documentation in Civil Litigation
Jr., J.
Investigating Chemical Accidents
Recent Developments in Enforcement of OSHA’s PSM Standard
Making Process Safety Pay Off in Plant Productivity, Reliability, and Quality
Walker, D., Remson, A., Rooney, J.
Relating Profit Risk Management to Reliability Management
Unwin, S.
Reliability Training: Equipping the Plant Staff to Achieve Reliability Excellence
Alfiere, J., Lorenzo, D., Walker, D.
Pressure Relief Device Sizing: What’s Known and What’s Not
Darby, R.
Review of Relief Devices for Oil & Gas Facilities and Software Technology for Their Design and Analysis
Kasiri, H., Gallego, J., Krebs, R., Hebert, S., Epps, N., Zone, R.
Company Wide Approaches to Emergency Relief System Evaluation and Upgrade: Benefits and Challenges
Lay, J.
Pressure Relief Device Isolation Methods
Edwards, V., DeMichael, D.
Technical Implementation of Retention Systems for Hazardous Materials in the Case of Pressure Relief
Klais, O., Wehmeier, G., Westphal, F.
Risk Management and Process Safety for the Toll Manufacturer
Leggett, D., Singh, J.
Dense Gas Dispersion Modeling for Aqueous Solutions
Lara, A., Mannan, S.
Use of Software Technology in the Generation and Submission of Risk Management Plans under EPA’s Rule 40 CFR Part 68
Estes, J.
Defining and Maintaining a RAGAGEP Program
Decker, L., Montgomery, R.
Using Computational Engineering Databases to Enforce RAGAGEP
Ahmad, A.
Plant & Environmental Safety: Risk and Uncertainty Analysis, A Course Beyond Steady - State and Desired Performance
Howat, C.
Ready-to-Use Safety Instructional Materials from SACHE
Cobb, J.
Process Safety Education at Texas A&M University
Darby, R.
Incorporating Process Safety into the Chemical Engineering Curriculum
Pintar, A., King, J., Crowl, D.
Process Safety in the Curriculum - Explosion Prevention Technical Elective
Sheppard, C.
Propane and LPG BLEVE Incident Simulation for Plant Safety Analysis, Emergency Response Planning and Training
A.M.Birk
Y2K Readiness in an Operating Plant
Y2K: Religion or Science?
Bosler, W.
Year 2000 Compliance
Summers, A.
The Frontline Learning Organization: From Concept to Competitive Advantage
Anderson, W.
Changing the Workplace Culture to Reap the Benefits of Good Reliability Programs
Heuval, W.
Risk Management Planning Presentation
Revalidation of a Large Flare Stack - Practical Lessons Learned
Hartung, S.
Selecting an Analysis Methodology for Performing a Layer of Protection Analysis
Montgomery, R., Huff, A.
A Sensitivity Analysis of PHAST Model Parameters for Formaldehyde Spills
Fuentes, K.
Source-Term Modeling for High Pressure, High Temperature Releases of High Flash Point Fluids
Shaikh, I., Mannan, S.
A Method for Evaluating Hazards of Low Volatility Toxic Liquids
Melton, T., Johnson, D.
Transforming Your Mechanical Integrity Program into a Reliability Program
Hayes, J., Montgomery, R., Remson, A.
Changing Safely-A Methodology for the Structured Assessment of Modifications to Safety Management Systems and Organizations
Wilson, D., Rowbottom, M.
Is Your SIS Grandfathered Under ANSI/ISA S84.01-1996?
Summers, A., Ford, K.