2019 Spring Meeting and 15th Global Congress on Process Safety

Session: Spring Meeting Poster Session

Chair

Trivedi, K., Exxonmobil

Presentations

05:00 PM

(59m) Possible FIRE Scenarios in Electrical Substations Due to Formation of Flammable Mixtures
Almubaddel, F., El-harbawi, M.
(59n) Ionic Transport in Reverse Osmosis Membrane
Chen, T.
(59f) Modeling Swelling Equilibrium of Sodium Polyacrylate in Water and Saline Water with Polyelectrolyte Non-Random Two Liquid Model
Yu, Y., Chen, C. C.
(59g) Thermodynamic Modeling of Aqueous Multivalent Polyelectrolyte Systems with Polyelectrolyte NRTL Model
Yu, Y., Chen, C. C., Li, Y.
(59h) Thermodynamic Modelling of Ca2+-Na+- Cl--CO2 Quaternary System with Electrolyte NRTL Model
Chen, T., Honarparvar, S., Reible, D., Chen, C. C.
(59ad) Novel Method Development for Pfas Contaminants Treatment in Landfills Leachates
Feng, M., Yang, B.
(59ab) Experimental and Theoretical Investigation of Radial Slot Jet Flow into Stagnant and Cross Flow Environments
Hassan, A., Smith, J., Alhameedi, H.
(59j) Improved Oil Recovery with Viscoelastic Surfactant: Screening and Effectiveness of Formulations
Nasir Janjua, A., Sultan, A. S., Kamal, M. S.
(59k) Laboratory Investigation of Viscoelastic Surfactant for Chemical EOR in High Salinity and High Temperature Carbonate Reservoirs
Nasir Janjua, A., Sultan, A. S., Kamal, M. S.
(59x) Advanced Two-Tip Optical Fiber Probe Technique to Local Gas and Liquid Saturation and Velocities Measurement within Various Commercial Catalyst Shapes in Pilot Plant Trickle Bed Reactors (TBRs)
Al-Dahhan, M. H.
(59af) Morphology Evolution in Titanium Dioxide Nanotubes Arrays Prepared By Electrochemicalanodization
Zea Ramírez, H. R., Tirano, J., Luhrs, C.
(59o) Retrofit-Ability As a Design Criterion for Energy Integrated Systems Zeeshan Farooq and Mahmoud Bahy Noureldin, energy System Division, P&csd Saudi Aramco,
Farooq, Z.
(59ag) N-Doped Cu/Cuxo/C Foam Catalyst Having Multi-Crystaline Derived from Alkaline N-Coordinated HKUST-1/CMC for Enhanced 4-Nitrophenol Reduction
Zhao, Z., Zhao, Z., Su, H. Sr.
(59aj) Green Oil Removal from Ethylene Plant Backend Hydrogenation Unit
Kurukchi, S.
(59s) Dissolved Oil Removal from Ethylene Plants Quench Water
Kurukchi, S., Gondolfe, J.
(59l) Optimizing Polymer Flooding in a Major Heavy Oil Carbonate Field in the Middle East
Elsharkawy, A., Alomair, O., Karbouj, O.
(59ah) Highly Graphitic and Weak-Polar Fe-Carbon with Self-Stacked Nanospongy Structure Derived from Silkworm Excrement for Enhanced Selective Recognition of Flavor Anisole
Zhao, Z., Su, H. Sr., Zhao, Z.
(59y) Removal of Volatile Organic Contaminants from Air Via Thermal Separation Technique
Alwan, G. M. Sr.
(59ai) Synthesis, MR Relaxivities, and in Vitro Cytotoxicity of Ligands Coated Gadolinium Oxide Nanomaterials
Ahmad, M.
(59b) Double Network Hydrogel from Acrylic Acid
Morgan, B., Kundu, S., Wijayapala, R.
(59al) Analysis of Polar Compounds in Essential Bio-Oils By Fourier Transform Ion Cyclotron Resonance Mass Spectrometry
Ramirez, C. X., Mejia-Ospino, E., Palacio Lozano, D. C., Barrow, M. P., Cabanzo, R.
(59c) Desalting Applications
Sloley, A. W.
(59ba) Production of Zero Defect (Zd) Slabs Through the Implementation of Smart Manufacturing Technologies in Steel Continuous Casting
Malkani, H.
(59bb) Data Modeling For Machine Learning And Data-Centric Analytics For Smart Aerospace Additive Manufacturing
Malkani, H.
(59p) Relationship, Selection, and Optimization of Filter Aid, Filter Media and Clarification Technologies for Contaminant Fines Removal from Process Slurries and Liquids
Bergquist, G.
(59bc) Smart Manufacturing For Chemical Processing: Energy Efficient Operation Of Air Separation Unit
Malkani, H.
(59bd) Inferential Modeling For Driving Out Energy Waste
Malkani, H.
(59be) Smart Connected Workers In Advanced Manufacturing
Corcio, M.
(59d) Performance Evaluation of Dust Suppressors of Ore Storage Piles By Spectroscopy and Wind Tunnel
Portela, N. D. A., Ribeiro, S., Silva Filho, E. A., Nunes, K., Filgueiras, P. R.
(59bf) Energy Management Systems For Subtractive And Additive Precision Manufacturing
Corcio, M.
(59q) Gas Liquid Solid High Pressure Separator Using Internal Hot Hydrogen Addition. Part I Experimental
Galiasso Tailleur, R.
(59bg) Smart Manufacturing Of Cement
Corcio, M.
(59bh) Energy Efficient Material Processing Through Automated Process Monitoring And Controls
Corcio, M.
(59ac) Comparative Study of Degradation Kinetics of Crude Oil Contaminated Mangrove and Clay Soils
Elechi, O.
(59z) Carbon-Based Au Catalyst for Acetylene Hydrochlorination Process: From Laboratory Data to Industrial Verification
Xu, H., Luo, G.
(59r) A Brief Review of Recent Development of Process Safety Management for Chemical Industry in East Asia
Horng, J. J., Liao, K. Y., Li, M. C.
(23b) Influence of Batchelor Flow on Agglomeration of NMC Hydroxide
Sun, X., Kim, W.
(59w) NOVA Chemical's Ethylene Plant 18 Year Continuous Operations with Chevron Phillips Chemical Company's E-SERIES® Catalyst
Sadaba Omana, M., Frezell, S., Pritchett, K.