2015 AIChE Spring Meeting and 11th Global Congress on Process Safety

Session: Poster Session

Presentations

05:00 PM

Aijun Wang
(71aw) Safety-Centered Site Master Planning
(71o) Facilty Siting Challenges
(71c) Developing Process Engineers into Effective HAZOP/LOPA Facilitators
(71k) Process Safety in Gas/Oil Transport Implementing Best-in-Class Procedure Management Practices - a Case Study
(71r) A Simplified PSM Guidance for Smaller Facilities Using a Risk Based Approach
(71h) Why Do We Still Have Blast Walls on Offshore Platforms?
(71ao) Best Practice MOC and Pssr 2014
(71w) Research on Security Access Model of Enterprises in Petrochemical Ports
(71t) Unlock the Value of Operational Data
(71aj) Comparison of Results of the Classified Areas of a Typical Hydrogen Generation Unit (GHU) Using the Standards NFPA 497 and API RP 505
(71y) Safety Integrity Level Sil Assessment about Deepwater Bop System
(71af) Quantitative Risk Assessment (QRA) with the Inclusion of Human and Organizational Factors and Maintenance
(71s) SIS Integrity Assessment of Pipelines Using Bow-Tie and LOPA
(71e) Optimal Sectioning of Hydrocarbon Transport Pipeline By Volume Minimization and Environmental Vulnerability Assessment
(71at) Predicting Far Field Blast Overpressures: An Evaluation of Enhanced Input Parameters for FLACS
(71am) Using Unrealistically Optimistic Failure Data: Is It Ethical?
(71m) Audit Management Best Practice – Seek and Ye Shall Find
(71q) Lessons Learned during Air Tightness Testing of Shelter-in-Place Buildings at Chemical Facilities
(71x) Introduction to Safety Instrumented System Management
Dust Explosion Incident Analysis, Prevention and Control
(71be) Incorporate Safety during Process Design
(71z) Lessons on Achieving Cost Effective ISA 84 SIS Lifecycle Sustainability
(71bc) Critical Success Factors for Effective PHAs
(71v) Heat Exchanger Design Parameters Effect on Low Pressure Side Maximum Pressures during a Tube Failure
(71ap) Application of Risk Analysis in Pilot Plants and Research Labs
(71ah) Dust Explosion Kinetics
(71as) High Integrity Pressure Protection Systems: Design, Analysis, Justification and Implementation
(71ai) Vapor Cloud Hazards of Enclosed Liquid Flammable Processes
(71an) Dynamic Simulation As a Robust Tool for Optimum Flare Systems Design
(71l) Predicting Thermal Behavior of Chemicals from Molecular Structure
(71bg) Field Application of Risk-Based Approach for Fatality Prevention
(71ae) Uncertainty Analysis for LOPA in the Offshore Industry
(71g) Experiment Study on Acoustic Emission Detection of Internal Leakage of Gas Ball Valves
(71aq) Integrating Cyber Security Risk Assessments into the Process Safety Management Work Process
(71i) Dynamic simulation of discharge process safety and optimization for multi-stage ground flare
(71d) Investigation of Self-Ignition Risks of Iron Sulfides in the Sour Crude Oil Storage
(71ar) Integrating Alarm Management into Your PHA and LOPA Processes
(71p) Process Safety in the Midstream Sector Under the Shale and Tight Oil and Gas Boom
(71ac) Experimental Study on Gas Explosion in an Obstructed Confined Pipe
(71bh) PROBLEMS AND RESOLUTIONS OF SIS ENGINEERING APPLICATION
(71ag) Implementing SIS Metrics for Life Cycle Management - Part 1: Proof Testing
(71bf) Study on Application of LOPA in HAZOP on China Refinery Design
(71ab) Application of Risk Prioritization Matrix of Nonconformities in the Offshore Industry
(71bd) Security Risks and Countermeasures of Pesticide Formulations Production Process
(71bb) Application of HAZOP Study On Some Butyl-Octyl Alcohol Plants
(71az) The Studies of Flame Propagation Simulation in the Municipal Pipeline
(71n) Screening Tool for Runaway Reaction Characterization. Optimizing Efforts for Emergency Relief Systems Design
(71ax) Exothermal test for green plastics materials by DSC
(71f) Assessment of Reliability and Risk at Dynamic Systems: A Discussion of Social-Technical Factors in the Exploration and Production of Oil at Pre-Salt Layer - Brazil