2016 AIChE Annual Meeting

Session: Poster Session: Materials Engineering & Sciences (08A - Polymers)

This is the poster session for the 8A Polymers Area within the Materials Engineering & Sciences Division.

Chair

Megan Robertson, University of Houston

Co-Chair

Matthew D. Green, Arizona State University

Presentations

06:00 PM

(255bz) High Pressure Co-Polymerization of Ethene by ATRP
Maria I. Stimeier, Markus Busch, Carolina Toloza Porras, Jan N. E. Duchateau, Diego Castaneda, Peter Neuteboom, Fons Schreurs
(255q) Characterization of Degradation of Acid Doped Nanocomposite PBI and PEEK Proton Exchange Membranes
Jianzhong Lou
(255aw) Atomistic Simulation Study on the Morphology of the Hydrated Perfluorosulfonic Acid Membrane
An-Tsung Kuo, Wataru Shinoda, Susumu Okazaki
(255bj) Organically Modified Clays As Rheology Modifiers and Dispersing Agents for Epoxy Packing of White LED
Shih-Huang Tung, Yu-Ting Tsai, Jiang-Jen Lin
(255bf) Morphogenesis of Microstructured Polymer Foams Formed By Thermally Induced Phase Separation: Theoretical and Experimental Study
Andra Nistor, Adam Rygl, Michal Vonka, Malvina Voclova, Maria Minichova, Juraj Kosek
(255aa) Behavior of Dendritic Polymers in Solutions: DLS and NMR Study
Anna Brzozowska, Walther Burchard, Piotr Bernatowicz, Jacek Gregorowicz
(255an) Porous Surface Induced Nucleation of Gypsum
Min Su, Yanyan Gao
(255az) The Task of Modeling Long Chain Branching in the LDPE Synthesis
Kristina M. Pflug, Markus Busch
(255x) Analyzing the Chemical and the Physical Characteristics of Crosslinked Zein Gel Films Cast from Acetic Acid Solutions
Hazal Turasan, Emma Barber, Morgan Meiser, Jozef Kokini
(255as) Parameterization of a Coarse Grained Model for Perfluorosulfonic Acid Polymer
An-Tsung Kuo, Wataru Shinoda, Susumu Okazaki
(255cp) Rapid End-Block Pullout in ABA Triblock Polymer Gels
Andrew Peters, Timothy P. Lodge
(255w) Study on Accelerated Aging of Biodegradable Poly(butylene adipate-co-terephthalate) Films for Mulch Applications
Qianqiu Xing, Wen-Jun Wang, Linbo Wu
(255bo) Polyolefin Toughened Polypropylene: Mixing Thermodynamcis
Jun Xu, Frank S. Bates
(255ce) Synthesis of Comb-Branched Polyolefinic Elastomers Using a Tandem System with FI-Ti and CGC-Ti Catalysts
Kailun Zhang, Bo-Geng Li, Shiping Zhu, Wen-Jun Wang
(255ca) Development and Application of Newly Invented Polyimide Aerogel and Its Synthesizing Method.
Jinyoung Kim, Daero Lee, Gunhwi Kim, Myeongsoo Kim, Jinuk Kwon, Juheon Lee, Haksoo Han
(255t) Ferromagnetic Ink: Covalent Attachment of Charged Polymers on Magnetic Nanoparticles Enables Magnetic Deinking
Martin Zeltner, Robert N. Grass, Corinne Hofer, Wendelin J. Stark
(255p) Anion Effects on the Structure and Ion Transfer Properties of Surface-Tethered Poly Ionic Liquids
Ian G. Njoroge, Brandon W. Bout, Xuanli Deng, G. Kane Jennings
(255bx) The Development of New Synthetic Approaches to Epoxide Polymerization
Nathaniel Lynd
(255u) The Effect of Water on the Thermal Transition Observed in Poly(allylamine hydrochloride)-Poly(acrylic acid) Complexes
Yanpu Zhang, Jodie Lutkenhaus, Maria Sammalkorpi, Fei Li, Ran Zhang, Luis D. Valenzuela
Charged polymers and polymers for energy storage and conversion
(255cb) Propene/1-Butene Random Copolymerization Catalyzed By a MgCl2-Supported Ziegler-Natta Catalyst
Zheng Zheng, Bo-Geng Li
(255a) Fabrication of PBI Based Composite Membrane for Application in High Temperature Polymer Electrolyte Membrane Fuel Cells
Sangrae Lee, Kwangwon Seo, Haksoo Han
Biomaterials, biomacromolecular gels, and polymers in solution
Modeling and simulation of polymers
(255cd) Influence of Sulfenamide Accelerators on Cure Kinetics and Properties of Natural Rubber Foam
Anongnat Somwangthanaroj, Pollawat Charoeythornkhajhornchai, Chavakorn Samthong
Stimuli-responsive polymers
(255cc) Online Monitor and Control of the Real-Time Composition of Ternary Gas Mixture in Batch Reactor By Three Cascade Flow Meters during Propene Polymerization
Zheng Zheng, Bo-Geng Li
(255co) Polyvinyl Alcohol (PVA) As Protective Colloid for Polystyrene Nanoparticles Synthesis Initiated By Oil-Soluble Initiator
Xiaojing Liu, Lu Yangcheng, Luo Guangsheng
Inhomogeneous polymers
(255ax) Chain-By-Chain Monte Carlo Method for Non-Linear Polymerization
Derya Demirel Ozcam, Fouad Teymour
Thermodynamics of polymers
(255e) Polymerized Ionic Liquid Triblock Terpolymers: Synthesis and Characterization
Patrick Lathrop, Yossef Elabd
(255ae) Improving Risk Assessment of Color Additives in Medical Device Polymers
Vaishnavi Chandrasekar, Dustin Janes, Christopher Forrey, David Saylor, Akhil Bajaj, Timothy Duncan, Jiwen Zheng, Kausar Riaz Ahmed, Ronald Brown, Brendan Casey
Polymer thin films and interfaces
(255f) Donor-Acceptor Fully Conjugated Block Copolymers through Chain-Growth Polymerizations
Youngmin Lee, Qing Wang, Enrique D. Gomez
(255al) Estimation of Kinetic Parameters for ATRP Polymerization from MWD Experimental Data Using the Pgf Technique
Cecilia Fortunatti, Vivina Hanazumi, Andres E. Ciolino, Mariano Asteasuain PIP 0123CO, Cristian Vitale
Polymer reaction engineering
Polymer emulsions
(255cj) Single Polymerization Determination of Reactivity Ratios Via in Situ Spectroscopic Techniques and a Simple Nonterminal Model for Chain Copolymerization
Bryan Beckingham, Gabriel Sanoja, Nathaniel Lynd
(255b) Pil-Derived Carbon
Rui Sun, Yossef Elabd, Kelly M. Meek
(255ac) Exploring the Effects and Interplay of Elastin-like Polypeptide (ELP) Charge and Hydrophobicity on Mcherry-ELP Fusion Protein Self-Assembly
Carolyn Mills, Bradley D. Olsen
(255ap) Improving Computational Cost of Monte Carlo Models in RAFT Polymerization Processes
Esteban Pintos, Adriana Brandolin, Claudia Sarmoria, Mariano Asteasuain PIP 0123CO, Patricia Hoch
(255am) Modeling of Reverse Atom Transfer Radical Polymerization in Miniemulsion Initiated By a Water-Soluble Radical Initiator
Ayelén Zurman, Mariano Asteasuain PIP 0123CO, Claudia Sarmoria, Adriana Brandolin
(255ad) Synthesis and Single Molecule Studies of DNA-PNIPAM Copolymers
Songsong Li, Charles M. Schroeder
(255v) Robust Anion Exchange Membranes for Alkaline Fuel Cell Applications
Gigi George, George Amobi Ozioko, Matthew Liberatore
(255d) Reinforced Magnetic Epoxy Nanocomposites with Conductive Polypyrrole Nanocoating on Nanomagnetite As a Coupling Agent for Electromagnetic Wave Absorber
Jiang Guo, Qingliang He, Xingru Yan, David P. Young, Suying Wei, Zhanhu Guo
(255bk) Thermomechanical Properties of Polylactide/Oligomerized Castor Oil Blends
Amber R. Tupper, Bahareh Baheri, Sunggyu Lee
(255cf) Industrial Production of Styrene-Butadiene Rubber: Dynamic Modeling, Process Intensification, Sensitivity and Uncertainty Analysis
Gurkan Sin, Jiri Pokorny, Juraj Kosek, Alexandr Zubov
(255cl) Olefin Polymerization with Metallocene Catalysts on Geometrically Tailored Silica Support Materials
Kyu Yong Choi, David Yang, Sangyool Lee, Dennis Tran
(255bc) Metal Nanocrystals Embedded in Polymer Thin Films for the Reporting of Material State
Ian G. Njoroge, Cole D. Brubaker, Talitha M. Frecker, Sandra J. Rosenthal, Douglas E. Adams, G. Kane Jennings