2013 AIChE Annual Meeting

Session: Poster Session: Materials Engineering & Sciences

This is the general poster session for the Materials Engineering & Sciences Division. Posters in all areas of the division are invited.

Chair

Holly A. Stretz, Tennessee Technological University

Co-Chairs

Bradley D. Olsen, Massachusetts Institute of Technology

Dongxia Liu, University of Maryland

Jingwen Zhang, University of Minnesota

Presentations

06:00 PM

(217h) Mathematical Model for the Bulk Polymerization of Styrene in the Presence of Polybutadiene Using a Trifunctional Initiator

Emilio Berkenwald, Graciela Morales, Diana Estenoz

(217cy) Development of Nanoparticle-Stacked Membranes Fabricated By Using Functionalized Silver Nanoparticles

Shinji Kawada, Daisuke Saeki, Hideto Matsuyama

(217am) Grafting of Maleic Anhydride Onto Natural Rubber Via Free Radical Initiation in Supercritical Carbon Dioxide

Barbara A. Wheelden, Amber R. Tupper, Ryan E. Tschannen, Sunggyu Lee

(217x) Synthesis of Nano Ag in SBA-15 Using Supercritical Carbon Dioxide and the Influence of Different Co-Solvents On the Morphology of the Nanophase

Yuling Ma, Jianzhong Yin, Aiqin Wang, Qinqin Xu

(217fq) Synthesis of Poly(N-vinyl-2-pyrrolidone)/Poly(N-isopropylacrylamide-co-acrylic acid) Colloidosomes Using UV Crosslinking

Yi Gong, Qing Lin Liu, Ai Mei Zhu, Qiu Gen Zhang

(217bj) Fabrication and Thin Film Characterization of Sulfonated Poly(Styrene-Isobutylene-Styrene) Triblock Copolymers for Microelectronic Applications

Agnes Padovani, Omar Movil

(217an) Material Design and Mechanistic Studies On Temperature-Responsive Polymer Electrolytes for Electrochemical Systems

Jesse C. Kelly, Mark E. Roberts

(217y) “Petal Effect” Superhydrophobic Surface Based On Polybenzoxazine

Zhong Xin, Juan Liu, Xin Lu, Changlu Zhou

(217dc) Adaptive Origami Structures and Their Mechanical Properties

Terry Shyu, Pablo F. Damasceno, Paul Dodd, Matthew Shlian, Max Shtein, Nicholas A. Kotov, Sharon C. Glotzer

(217bk) Confinement and Antiplasticization in Hydrated Thin Ionomer Films

Shudipto Dishari, Michael A. Hickner

(217ao) Non-Isothermal Analysis of Extrusion Film Casting Process Using Molecular Constitutive Equations

Harshawardhan V. Pol, Pankaj Doshi, Ashish K. Lele, Sourya Banik, Sumeet S. Thete, Lal Busher Azad, Renu Dhadwal

(217br) A Biodegradable Scaffold That Inhibits Nosocomial Infections While Promoting Healing

Hongyan Ma, James D. Bryers, Lei Zhang, Tao Bai

(217i) Preparation of Hierarchical Hydrogels By Photocrosslinking Induced Phase Separation in Evaporating Solvents

Liang Wang, Yifu Ding

(217bl) Toughened Epoxy Thermosets Through Rearrangements of Network Molecular Architecture

Majid Sharifi

(217ap) Nonlinear Dynamics and Hopf Bifurcation in Controlled/"Living" Radical Polymerization of Styrene

Nan Zhang, Warren Seider, Bingzhen Chen

(217ei) Controlled Release Inorganic Gel for Air and Surface Disinfections

Doo Won Han, Wei Han, Wai Kwong Ching, Chung Kan Chan, Viola Sim, Felicia Febriana Budihardjo, King Lun Yeung

(217b) Heat Resistance Effect of CaSO4 Whiskers to PVC Composites

Shuhua Zhang, Yuanyuan Wang, Boru Zhang, Yijun Xie, Zhiwei Huang, Weijun Liu, Jiangna Di

(217cz) Composite Asymmetric Bi-Layer PVA-Cellulose Ultrafiltration Membranes

John Miles, Audie Thompson, Felecia Nave

(217fk) Synthesis and Characterization of a Polysiloxane Based Magnetic Liquid Crystalline Elastomer Composite

Sephany M. Herrera-Posada, Barbara Calcagno, Aldo Acevedo

(217ej) Chlorine-Free Electrochemical Disinfection of Water Contaminated With Escherichia Coli

Sandugash Yergeshbayeva, Nikolay Barashkov, Irina Irgibaeva, Boris Kisselev, Nellya Bissenova

(217j) Non-Equilibrium Molecular Dynamics Studies of Miscibility and Rheological Behaviour of Blends of Dendrimer/Linear and Hyperbranched/Linear Polymers Under Planar Extensional Flow

Elnaz Hajizadeh, B. D. Todd, P. J. Daivis

(217bm) Characterizing Interfacial Interactions in Li-Ion Batteries

Praveen Meduri, Michael A. Hickner

(217aq) Sucrose Ester/ Poly(lactic acid) Nanocomposites for Food Packaging Application: Fabrication and Characterization

VALAPA RAVI BABU, Gopal Pugazhenthi, Vimal Katiyar

(217z) Transferring The Mechanical Behavior Of Polymeric Surface Layers From Atomistic To Continuum

Marcus Schmidt, Roger A. Sauer, Ahmed E. Ismail

(217k) Diffusion and Subsequent Polymerization of Monomer in Polymer Pellets——An Effective Approach to Prepare Polymer Nanoblends

Fang Chen, Jian Yu

(217fl) 1-n-Alkylimidazoles for Acid Gas Removal: A Study of SO2:N-Functionalized Imidazole Complexes and Absorption Properties

Jason Bara, Matthew S. Shannon, A. Christopher Irvin

(217aa) Enhancing the Rheological Properties of Main-Chain Liquid Crystalline Polymers for Film Coextrusion

Zhenpeng Li, Eric Baer, Christopher J. Ellison, Paola Ganzales

(217df) Engineering Large Self-Assembled Amyloid Fibers As Robust Biomaterials

Devin Ridgley, Justin R. Barone

(217bt) Pt Nanoparticle Synthesis Via Atomic Layer Deposition for Use in Fuel Cells

Alia M. Lubers, Kelly M. Anderson, Troy D. Gould, Matthias Faust, Martin Seipenbusch, Alan Weimer

(217fp) Influenza Nanovaccines Containing Hemagglutinin Induce Humoral and Cell-Mediated Immunity

Kathleen A. Ross, Lucas Huntimer, Hyelee Loyd, Shaheen Ahmed, Anthony Sambol, Steven Hinrichs, Tatiana Bronich, Susan Carpenter, Michael J. Wannemuehler, Balaji Narasimhan

(217dh) Investigating the Relationships Between Mechanical and Thermal Properties of Hydrogel Nanocomposites

Josergio Zaragoza, Matthew Blanco, Kalpith Ramamoorthi, Aitor Zabalegui, Hohyun Lee, Prashanth Asuri

(217bu) A New Strategy for the Photopolymerization of Heterocyclic and Polar Monomers

John W. Whitley, W. Jeffrey Horne, Jason Bara

(217ek) 3D Scaffolds With Inverted Colloidal Crystal Geometry From Expandable Cationic Poly(DMAA-co-AMTAC) Hydrogel for Well-Plate Format

Joong Hwan Bahng, Yichun Wang, Bongjun Yeom, Nicholas Kotov

(217di) Controlling Morphology and Enhancing Electrochemical Performance of Cobalt Oxide By Addition of Graphite

Ling Fei, Hongmei Luo

(217bv) Polymerization in Micro-Layers to Ultrahigh Molecular Weight Nonlinear Polycarbonates

Kyu Yong Choi, In Hak Baick

(217db) A Novel Method for Preparation of High Strength Hollow Spherical Silicon Dioxide By Plasma Technology

Junmei Fan

(217dj) Enzymatic Synthesis of Conducting Polymer-Nanocarbon Composites For Supercapacitor-Electrode Materials

Nasrin Raseda, Junghee Park, Keungarp Ryu

(217ar) Dynamic Covalent Assembly of Information-Bearing Oligomers

Timothy F. Scott, Tao Wei

(217el) Mesoscale Ordering and Mechanical Response in Polydomain Smectic Networks

Ronald C. Hedden, Ziniu Yu

(217dk) Characterization and Performance of Polyquinoline - Proton Exchange Membranes

Irawan Pramudya, Adelia Latief, Alan Fuchs, Joko Sutrisno

(217bw) Characterization of Monomer Miniemulsion Stability

Paula M. N. Ambrogi, Reinaldo Giudici, Cristina S. R. Serra, María Magdalena E. Cólman, Claudia Sayer, Dennis Chicoma

(217em) Synthesis and Effect of Fuel of Sr Doped CaTiO3 Using By Solution Combustion Synthesis (SCS)

Choong Hwan Jung, Yeon-Ku Kim, Soon Dong Park

(217l) Rheological Characterization of Commercial Alginate Solutions With High Viscosity and Its Effect in the Production of Microparticles

Cristina Rodriguez-Rivero, Miguel A. Galan, Eva M. Martín del Valle, Loic Hilliou

(217as) A Microfluidic Method to Evaluate Degradable Hydrogels for Drug Delivery

Erin L. Jablonski, Brandon M. Vogel, James E. Maneval, Anne Ellenberger

(217cx) Liquid-Liquid Dispersion Behavior and Particle Formation in Suspension Polymerization Process

Guiming Xie, Yongzhong Bao

(217dl) Analysis and Observation of Bulk Polymer Properties in Alkyl-Imidazole Based Poly(Ionic Liquids)

W. Jeffrey Horne, Jason Bara, Spenser S. Hayward, Matthew S. Shannon, Kelsey Terrill

(217at) Rheological Properties of Thermoviscosifying Polymers in High-Temperature High-Salinity Environment

Muhammad Shahzad Kamal, Abdullah S. Sultan, Ibnelwaleed A. Hussein, Ming Han

(217en) Electrospun Polyacrylonitrile-Based Carbon-Iron Oxide-Silica Nanocomposites Fibers

Honglin Qu, Suying Wei, Zhanhu Guo

(217dm) One-Step Process to Create Porous Structures in Cross-Linked Polymer Films Via Breath-Figure Formations During in Situ Crosslinking Reactions