2012 AIChE Annual Meeting

Session: Poster Session: Materials Engineering and Sciences

Co-Chair

Ahmed E. Ismail, Sandia National Laboratories

Presentations

06:00 PM

(180bg) Oxidation, Ignition and Oxidation of Novel Al-Based Reactive Composites
Shasha Zhang, Edward L. Dreizin
(180al) Influence of Excluded Volume Interactions On Dynamical Behavior of Flexible Macromolecules: A Brownian Dynamics Simulation Study
(180ak) Iron-Based Redox Polymerization towards Nanoparticle Synthesis in Hydrogel
D.B. Bhattacharyya
(180bk) Structure and Property Development of Poly(3-hexylthiophene) Organogels Probed with Combined Rheology, Conductivity and Small Angle Neutron Scattering
Kathleen Weigandt
(180aj) Asymmetric Rubbing Experiments to Understand Contact Electrification of Polymeric Powders
Daniel J. Lacks, Richard Pham
(180bj) Morphology Development in PC/SAN Blends: Roles of Extensional Flow and Nanoparticle Stabilization
Rakesh K. Gupta
(180ai) Fast Lattice Monte Carlo Simulations of Polymer Brushes
(180ah) The Effect of Glass Fiber Length On Experimental Orientation Distribution in the Entry Region of Injection Molded Composites
John T. Hofmann, Kevin J. Meyer, D. G. Baird
(180bi) Response Surface Analysis of the Effect of Drie Process Parameters On Micro/Nanopillar Arrays
Kane J. Miller, Kevin M. Walsh
(180bh) Electrochemical Characterization of LiCoO2 and LiMn2O4 Rechargeable Cathode Materials Produced by Ccso
(180bl) Factorial Experiment Design in Colloid Nanoparticle Synthesis
(180bf) Development of Environmentally Responsive, Integrated Soft and Hard Materials
Eric Stevens, Yuping Pan
(180ag) Interaction of Sedimenting Drops in a Miscible Solution – Formation of Heterogeneous Toroidal-Spiral Particles
Vishal Sharma
(180be) Molecular Weight Dependence of Ionic Conductivity for Low Molecular Weight Block Copolymer Electrolytes
Rodger Yuan
(180af) Solubility and Diffusivity of Water and of Organic Liquids in Glassy and Rubbery Polymers
Claudia Troiano, Maria Grazia De Angelis
(180bd) Molecular Dynamics Simulations of Nanoparticle Interactions with Ionic Liquids
Michael Machas, Denzil S. Frost, Lenore L. Dai
(180ae) Mass Transport Properties of Gases and Vapors in Matrimid Polyimide
Giulio Sarti
(180bc) Fabrication of Chitosan-Poly(ethylene glycol) Hybrid Hydrogel Microparticles Via Replica Molding and Its Application Toward Facile Conjugation of Biological Molecules Using Copper-Free Click Chemistry
(180ba) Quantum Dot Sensitized Titanium Dioxide Thin Films for Photovoltaic Applications
Joshua Hill, Yuling Li
(180bt) Surface Grafting Poly(N-isopropylacrylamide-co-Carboxylic Acid) On Core-Shell Nanoparticles Via Reversible Addition Fragmentation Chain Transfer Polymerization
Diane Mar, Cahit Evrensel
(180bz) Scaffolded Growth of Hierarchically Structured Porous Materials towards High-Flux Molecular Separations and Reaction-Separation Technologies
(180by) Templated Growth of Three-Dimensionally Ordered Mesoporous (3DOm) Zirconia Materials As Tunable Catalysts for Biomass Conversion
Mark A. Snyder
(180bx) Electrochromic Polymer Nanocomposites
Yunfeng Li
(180bw) Self-Assembled Rosette Nanotube Composites Improve Chondrocyte Functions
Linlin Sun, Lijie Grace Zhang, Usha Hemraz, Hicham Fenniri, Thomas J. Webster
(180ca) Solvent Penetration Rate in Tablet Measurement Using Video Image Processing
Dan Braido
(180an) Modeling Extrusion Film Casting Process Using Coarse-Grained Molecular Constitutive Equations
Ashish K. Lele
(180bv) Surface Segregation in Blends of Cyclic and Linear Chains
Shih-fan Wang, Qiming He
(180bu) Effect of Nanoparticles On Rubber Mechanics
C.F. Zukoski
(180ad) Entangled Polystyrene Melts with Well-Defined Long-Chain Branching in Large Deformation
Gengxin Liu, Hongwei Ma, Kwstas Ntetsikas, Apostolos Avgeropoulos, Roderic P. Quirk, Shi-Qing Wang
(180bs) Highly Aromatic Polymer Containing Quinoxaline Functional Groups for Proton Exchange Membrane Fuel Cells (PEMFCs)
Irawan Pramudya, Wesley Clary, Rigel Hanbury, Adelia Latief
(180br) A Continuum-Based Dissolution-Precipitation Model for Very Early Age Hydration of Alite
Manohar Gottapu
(180am) Simulations of the Pyrolysis of Hydridopolycarbosilane (HPCS) Polymer Using the Reaxff Reactive Force Field
Lianchi Liu, Theodore Tsotsis, William A. Goddard, Muhammad Sahimi
(180bp) Highly Aromatic Polymer - Quinoxaline Functional Groups for Proton Exchange Membrane Fuel Cells
Joko Sutrisno, Irawan Pramudya, Wesley Clary, Rigel Hanbury, Adelia Latief
(180bo) Highly Aromatic Polymer Containing Quinoxaline Functional Groups for Proton Exchange Membrane Fuel Cells
Irawan Pramudya, Wesley Clary, Rigel Hanbury, Adelia Latief
(180ap) Synthesis of Ether Polycarboxylate Superplasticizer and the Application in Gypsum
Wan Xiuqin
(180bn) 2D and 3D Photolithography Using Diels-Alder and Thiol-Ene Click Reactions
Gayla Berg, Brian Adzima, Christopher N. Bowman
(180bm) Berberine Loaded Burst and Sustained Release Electrospun Nanofibrous for Wound Dressing
Bo Yang, Ying Deng
(180ar) A Study of Dynamically Tuned Surface Properties in Lithographically-Patterned Membranes
Nicholas A. Kotov
(180ao) Devitrification of Polymer Glasses
Shiwang Cheng, Shi-Qing Wang
(180au) Interfacial Interaction Induced Relaxation and Its Impact On the Long-Term Tribology Properties of Nanometer-Thick Polymer Melts
Yongjin Wang, Lei Li, Jianing Sun
(180m) Particle On a String: Equilibrium Behavior of Surface-Tethered Particles by Monte Carlo Simulation
Ian Hamilton, Marc A. Robert
(180cb) How Brittle and Ductile Failures Occur: Plasticity Vs. Elasticity?
Panpan Lin, Shi-Qing Wang
(180at) Tribological and Mechanical Characterization of κ-Carrageenan Hydrogels
Andrew Kozbial, Cristian Riley, Lei Li
(180a) Electrospinning of Metal Nanofibers
David Lavoie, Meaghan Brooks, Nese Orbey
(180l) Model-Based Monomer Feeding Strategies On Tailoring Styrene/Butyl Acrylate Copolymer with Controlled Sequence Distribution Via RAFT Miniemulsion Polymerization
(180k) Novel Fluorinated Poly(aryl ether oxadiazole)s with Allyl Ammonium Groups for Anion Exchange Membranes
Li Cunpu
(180o) Complete Molecular Weight Distributions of Linear Polymers Using Electrospray Differential Mobility Analysis
Rajasekhar Anumolu, Leonard F. Pease
(180j) Controlling Crystal Phase Transition From Form II to I in Isotactic Poly-1-Butene Using CO2
Yang Xu, Lei Li, Ling Zhao
(180i) Covalently-Colored Polymer Latex Prepared by Emulsion Polymerization Using Polymerizable Dyes
Jie Shen, Wenjiao Ji, Guanzhi Cheng, Chengyou Kan
(180h) Rheological and Adhesive Properties of Poly(acrylic acid)/Clay Nanocomposite Hydrogels As Biocompatible Adhesive