2005 39th Annual Loss Prevention Symposium

Session: TECHNICAL PAPERS

Presentations

Inerting, a Reliable and Effective Preventive Measure Against Explosions
Hoppe, T., Jaeger, N.
Using Limiting Air Pressure (LAP) as an Alternative to Inertion in Rotary Dryers
Toth, M., Muzzio, D., , Cunningham, L.
Loss of Inerting Due to Multiple Exhaust Vents
Thomas, J., Ketchum, D., Baker, Q.
Inerting of Centrifuges for Safe Operation
Grossel, S.
Missed Opportunities in Reactive Chemical Hazard Evaluations
Ogle, R., Morrison, D., Carpenter, A., Su, Y.
Rapid Reactivity Screening Using a Nanocalorimeter
Liu, Y., Saraf, S., Ugaz, V., Rogers, W., Mannan, M., Saraf, S.
Reactivity Investigation of Mixtures of Propane and Nitrous Oxide
Willey, R., Hu, S., Moses, J.
Chemical Reactivity Hazards and Inherently Safer Technology
Venugopal, B., Kohn, D.
Rapid Identification of Reactivity Hazards in a Multi-Use Facility
Leggett, D.
Panel Discussion on Chemical Reactivity Hazards Issues
Johnson, R., Dunbobbin, B.
Explosions in the Manufacturing Industry: Data from the Hazardous Substances Emergency Events Surveillance (HSEES), 1996-2001
Berkowitz, Z., Horton, D., Kaye, W.
Prediction of Minimum Flash Point Behavior for Binary Mixtures
Vidal, M., Rogers, W., Mannan, M.
Buoyant Gas Layer Deflagration Effects
Zalosh, R., Stern-Gottfried, J.
BLEVE Blast by Expansion-Controlled Evaporation
Berg, A., Voort, M., Weerheijm, J., Versloot, N.
Modeling the Consequences of Bursting Vessels Inside Enclosed Structures using Wall Failure Criteria
Herrmann, D.
Design Considerations in Dust Explosion Inerting and Suppression
Dastidar, A., Going, J., Khan, F., Amyotte, P.
Barrier Spacing to Mitigate Explosion Propagation in Ducts
Senecal, J., Garzia, H.
Containment of Pharmaceutical Compounds: A Risk Based Approach
Moore, B.
Low Temperature Oxidation of Methanol in the Presence of Sponge Nickel Leads to Filter Overpressure Incident
Davis, E.
A Method to Determine if a Flowing Suspension Might Cause Electrostatic Damage to the Glass/TFE Liner of Steel Equipment
Muzzio, D., Toth, M.
A Safe and Practical Procedure to Prepare Ethyl Diazoacetate
Wang, S., Kotnis, A., Simpson, J., Merkl, W., Domina, D., Kiang, S.
Pfizer's Global Approach for Reducing Risks in Hydrogenation Operations
Karayigitoglu, C., Holroyde, J.
Effectively Managing Change
Thornton, S.
Back To The Basics In Dust Explosions
Kirby, D.
Dust Explosion Scenarios and Case Histories in the CCPS Guidelines for Safe Handling of Powders and Bulk Solids
Zalosh, R., Grossel, S., Kahn, R., Sliva, D.
Investigation Of A Combustible Dust Explosion at an Automotive Acoustic Insulation Manufacture: A Case Study of A U.S. Chemical Safety And Hazard Investigation Board
Hoyle, W., Joseph, G., Kaszniak, M., Wallace, S.
Evaluation Of Dust And Hybrid Explosion Potential In Process Plants
Nalda-Reyes, B., Dastidar, A., Dahn, C.
Dust Explosion Venting through Ducts
Ural, E.
Combustible Dust Hazard Study
Blair, A., Hoyle, B.
Discussion on Dust Hazard Study
Blair, A., Hoyle, B.
Insidious Explosion Hazards in the Mining Industry
Tjernlund, D., Luzik, S.
Two Large Losses: Refinery Fire and Vapor Cloud Explosion at a Natural Gas Processing Plant
Yuill, J.
U.S. Chemical Safety Board Investigation: Positive Pressure Control Room Failure
Long, L., Banks, J., Morris, M., Murphy, J., Wallace, S.
The 27 March 2003 Billy-Berclau Accident - A Technical and Organisational Investigation
Lecoze, J., Dechy, N., Lim, S., Leprette, E., Branka, R.
When Risk Becomes Reality: Formosa Plastics' Response to a Plant Explosion
Thibault, R.
Handling Chemicals in Small Containers
Ness, A., Gibson, R.