International Symposium on Runaway Reactions

Session: TECHNICAL PAPERS

Presentations

Scaling Rules For Prediction Of Thermal Runaway
Paula F Beever, John F Griffiths
Fundamental Aspects Of Thermal Analysis And Heat Flux Calorimetry
Terr Boddington, John F Griffiths, Peter G Laye, Dorothy C Nelson
A New Release Of The ASTM CHETAH Program For Hazard Evaluation: Versions For Mainframe And Personal Computer
David J Frurip, El Freedman, George R Hertel
Explicit And Implicit Use Of Scale-Up Principles For The Assessment Of Thermal Runaway Risks In Chemical Production
R Gygax
The Use/Misuse Of The 100 Degree Rule In The Interpretation Of Thermal Hazard Tests
T. C Hofelich, R. C Thomas
The Use Of SimuSolv In The Modeling Of ARC (Accelerating Rate Calorimeter) Data
Henry T Kohlbrand
The Influence Of A Constant Power Heat Source On The Critical Conditions For Thermal Explosion
T. J Snee
Heat Flow Calorimetry As A Testing Method For Preventing Runaway Reactions
To Hoppe, Bernhar Grob
Runaway Reaction And Safety Measures In Organic Processes
D. M. D Faveri, C Zontano, C Pagella, A Vidili, G Ferraiolo
The Evaluation Of Thermal Instabilities Using ARC And Advanced DTA Methods
K. H Mix
The Design And Operation Of A Reflux Heat Flow Caloimeter For Studying Reactions At Boiling
C. H Steele, P. F Nolan
The Use Of Calorimetry For Studying The Early Part Of Potential Thermal Runaway Reactions
T. C Hofelich
Towards The Prediction Of Venting Characteristics With The Codes SAFIRE And DEERS
A. N Skouloudis, H. M Kottowski, K. I Bell, R Oster
Round-Robin Vent Sizing Package Results
Joseph C Leung, Michael J Creed, Harold G Fisher
The Advantages And Limitiations Of Adiabatic Dewar Calorimetry In Chemical Hazard Testing
Richard L Rogers
The Evaluation Of Self-Heating In Bulk Handling Of Unstable Solids
S Tharmalingam
PHI-TEC: Enhanced Vent Sizing Calorimeter - Application And Comparison With Existing Devices
Jasbi Singh
Reaction Kinetics From Self-Heat Data - Correction For The Depetion Of Sample
M Ahmed, H. G Fisher, A. M Janeshek
Evolution Of Flow Patterns In Tubes And In Vessels; Influence Of Physical Properties
Rolan Oster, Heinz M Kottowski, Pierr Shroer
Laboratory Tool For Characterizing Chemical Systems
Hans K Fauske, George H Clare, Michael J Creed
Efficient Design Of Reactor Relief Systems
H. A Duxbury, A. J Wilday
Safety Relief System Design And Performance In A Hydrogen Peroxide System
Christopher J Crowley, James A Block
Emergency Pressure Relief Discharge Control By Passive Quenching
Alan G Keiter
Reactive Systems Vent Sizing Evaluations
Michael A Grolmes, Joseph C Leung, Hans K Fauske
Assessing Run-Away Of A Grignard Reaction
M. C Jones
The Anatomy Of An Acrylic Acid Runaway Polymerization
Leon B Levy, James D Penrod
Safety Of Exothermic Reactions: A UK Strategy
M. F Pantony, N. F Scilly, J. A Barton
Assessment Of Chemical Reaction Hazards In Batch Processing
Paul G Lambert, Gordo Amery
QRA Of Runaway Reactions In A Peroxy Acid CSTR
J. S Arendt, R. P Marra
The Systematic Assessment Of Chemical Reaction Hazards
Richard L Rogers
Scale-Up Heat Transfer Data For Safe Reactor Operation
C. H Steele, P. F Nolan, A Hirst, A. J Starkie, J. L Lowe
Strategy For The Thermal Hazard Evaluation Of Chemical Reactions, Illustrated By An Analysis Of The Nitration Of Toluene
J. L Cronin, P. F Nolan, J. A Barton
Simplified Chemical And Equipment Screening For Emergency Venting Safety Reviews Based On The DIERS Technology
John A Noronha, Rick J Seyler, Anthony J Torres
Design Charts For Two-Phase Flashing Flow In Emergency Pressure Relief Systems
K. E First, J. E Huff
Highlights Of FM Inspection Guidelines On Emergency Relief Systems
D. P Mason