2023 Spring Meeting and 19th Global Congress on Process Safety

Session: Poster Session: Fuels and Petrochemicals Division

Chair

Presentations

05:00 PM

(44f) Predicting the Potential of Asphaltene Deposition at Reservoir Condition in Lower Fars
Nora Borashid, Adel Elsharkawy
(44g) Impact of Secondary Reactions of Fluid Catalytic Cracking on the Yield of Light Olefins
Shatha Alabbad, Khalid Almajnouni, Isidoro Morales Osorio
(44p) Experimental Investigation of Magnetic Field Influence on Viscosity of Waxy Crude Oil Emulsion
Xueying Li, Lei Hou
(44h) Study on Hydroprocessing of Waste Plastic Pyrolysis Oil for Chemical Recycling
Eun-Hee Kwon, Sukhyun Lim, Hung Pham, Ki Duk Kim, Nam Sun Nho, Kwang-ho Kim
(44c) Optimization of Solvent Deasphalting Process to Produce Deasphalted Oil for Partial Upgrading of Heavy Oil with Visbreaking
Nam Sun Nho, Youngdoo Kim, Sukhyun Lim, Sun-A Choi, Eun-Hee Kwon, Ki-Duk Kim, Hung Pham, Kwang Ho Kim
(44i) Surfactant–Polymer Flooding in Carbonate Using Novel Synthesized Zwitterionic Surfactant and Oilfield Polyacrylamide
Syed Hussain, Muhammad Shahzad Kamal, Afeez Gbadamosi, Shirish Patil, Dhafer Al-Shehri
(44j) Kinetic Modeling of CO2-Assisted Oxidative Dehydrogenation of Propane over CrOx/SiO2 Catalysts
Iljun Chung, Jinsu Kim, Hyunmin Oh, Hyunjun Jeong, Jisu PARK, Yongju Yun
(44k) Effect of Phosphorus Modification over Pt/Al2O3 catalyst for Non-Oxidative Propane Dehydrogenation
Jungmok Oh, Namgi Jeon, Iljung Chung, Okkyun Seo, Akhil Tayal, Youngju Yun
(44d) CO2 Dissociation over Ni with Doped Ceria Catalysts
Phillip Mynarski, Saurav Kumar, Ben Jang
(44l) Effect of Size and Polydispersity of Polyacrylamide Solutions Rheology Under Elongational Flow
Diego Soetrisno, Carina Martinez, Mariah J. Gallegos, Vivek Sharma, Jacinta C. Conrad
(44n) Process Design and Mechanistic Modeling of the per- and Poly-Fluoroalkyl Substances (PFAS) Produced from the Thermal Degradation of Fluoropolymers
Patrick B. Dawson, Augustine H. Kim, Joseph D. Taptich, Tessy S. Ritchie, Victor A. Jaffett, Bryan Lagasse, Matthew Gettings, Simuck Yuk, Pamela L. Sheehan, Enoch Nagelli, Juan Lucero
(44m) Design of a Steam Condensate Waste Processing System and Creative Reuse of the Condensate in the Oil Refinery
Avinashkumar Karre
(44o) A Comparative Study of Anti-Fouling Characteristics Using Ni-P and Ni-P-Cu Coated Mild Steel
Suparna Bhattacharyya
(44b) New Approached Used to Redesign & Optimize the Flare In Petrochemical Plant
Muhammad Farooq Fareed, Saud Al Jebreen
(44a) Innovative Solution to Select Compatible Process & Material For New & Strange Process streams
Muhammad Farooq Fareed