2015 AIChE Spring Meeting and 11th Global Congress on Process Safety

(74r) Characterization of Critical Properties and Acentric Factors for High-Molecular-Weight-Fluids, Petroleum Fractions, Coal and Natural Products

Authors

Akindele Tododo, Texas Tech University

Characterizing methods reported by Walas (1985), Poling et al. (2001) and Ihmels-Ambrose (2010) for pure substances are based on structural formula and therefore not suitable for pseudo-component properties (or poorly characterized mixtures encountered with petroleum, coal and natural products, which are usually based on measured properties such as average molecular weight, boiling point and specific gravity (at 20oC)1 rather than molecular structure). The Paraffinic-Naphthenic-Aromatic (PNA) reported by Peng- Robinson (1978) or the group contribution methods by Lydersen et al. (1955) (or the methods based on carbon number reported by Whitson (1983) and Panuganti-Chapman (2013) are not considered in this report because the intention here is not to gain molecular insights into crude-oil properties but rather to treat pseudo-component properties as single-lumped component for the sole purpose of modeling by using cubic equations of state. Also, the trusted Database as tabulated by the NIST Groups for the critical properties and acentric factors do not include n-tetracontane (nC40H82), even though specific volumes at several temperatures and pressures for n-tetracontane have been reported by Arthur Doolittle since 1964 (J. Chem. Eng. Data, 9 (2), 275, 1964).

Consequently, thirty-six methods of characterizing critical properties and acentric factors for the parameters of cubic equations of state used in the process and reservoir simulation are evaluated for ease of implementation and use for high-molecular-weight-fluids, petroleum fractions, coal tar liquids and natural products. Analyses of results shows the methods are not adequate for poorly characterized pseudo-components of high aromatic, naphthenic and cycloalkanes; and beyond n-Octadecane hydrocarbons, some critical property parameters (critical pressure and volume, critical-Z factor and acentric factor: which is greater than 1 and therefore, is physically meaningless) are usually based or trial-and trial error techniques: thus, lacking consistency with lighter hydrocarbons in the petroleum fractions assay. While most of the estimation methods provide satisfactory predictions of the critical temperatures, they all underestimated critical pressures of the pseudo-components.

By using the API Database as reported by the University of Pennsylvania Group and gathering data from Hydrocarbon Processing and other relevant sources (theses and dissertations reports), we developed a Paraffinic-Naphthenic-Aromatic Characterization Factor into the correlation for critical temperature in terms of average molecular weight (Mw), boiling point (Tb) and specific gravity (Sg) and we use several cross-plotting of the ratio of boiling point to critical temperature (Tb/Tc) versus molecular weight, critical properties (Pc, Vc) and acentric factor (ω) to generate high-correlation coefficients; correlating groups, such as (Tb/Tc), (Tc/Pc), (Vc/Zc), (Mw/Pc), (Mw/Tc) and Zc versus molecular weight or acentric factor show a high-correlation coefficients. While we claim no theoretical basis (apart from the high-correlation coefficients and the statistically derived predictive groups), the principles of dimensional similitude provide the convenient basis in the selected groupings. The grouping parameters reduce the number of tailored-fitting parameters and thus preclude the need for extensive experimentally measured data for the unstable petroleum fractions and pseudo-components.

Hundred petroleum fractions reported by Roess (1936), Lenoir-Hipkin enthalpy (1973) and petroleum fraction data are used to validate the pseudo-component critical properties developed in this reported. In comparison with available correlative methods, the current approach is better in accuracy and ease of implementation in cubic equations of state modeling. The current approach is also validated for predicting viscosity of coal liquids (Baltatu, 1985; 1995) as well as predicting densities of natural products.  While the current approach may not be convenient for the type of work in the petroleum refining operations, the methodology is superior for empirical characterization of pseudo-component critical properties and acentric factors as lumped-single component and it thus offers another technique to the traditional pseudo-component, or hypothetical-component modeling approach for process and reservoir simulation models. It is therefore recommended for high-molecular-weight components for which experimental critical properties are typically unavailable.

References:

  1. Riazi, R. M. Characterization and Properties of Petroleum Fractions; ASTM: Philadelphia, 2005

  2. API, Properties of Hydrocarbons of High Molecular Weight, API Research Project 42, American Petroleum Institute, Washington, DC, 1966.

  3. Riazi, M. R., Daubert, T. E., “Simplify Property Prediction,” Hydrocarbon Process, Petrol. Refiner, 59(3), 115-116, 1980

  4. Lin, H. M., Chao, K. C., “Correlation of Critical Properties and Acentric Factor of Hydrocarbon Derivatives” AIChE J., 30(6), 153-158, 1984

  5. Watson, K. M., Nelson, E. F., Murphy, G. B., “Characterization of Petroleum Fractions,” Ind. Eng. Chem. 27, 1460-4, 1935.

  6. Winn, F. W., “Simplified Monograph Presentation, Characterization of Petroleum Fraction,” Pet. Refin., 36(2), 157, 1957

  7. Smith, R. L., Watson, K. M., “Boiling Points and Critical Properties of Hydrocarbon Mixtures,” Ind. Eng. Chem., 29, 1408, 1937

  8. Watansiri, S., Owens, V. H., Starling, K. E., “Correlation for Estimating Critical Constants, Acentric Factor, and Dipole Moment for Undefined Coal-Fluid Fractions,” Ind. Eng. Chem. Process Des. Dev., 24, 294-96, 1985

  9. Riazi, M. R., Daubert, T. E., “Characterization Parameters for Petroleum Fractions,” Ind. Eng. Chem. Res., 26(24), 755-759, 1987

  10. Abbott, M. M., Kaufmann, T. G., Domash, L., “A Correlation for Petroleum Liquid Viscosities of Petroleum Fractions,” Can. J. Chem. Eng., 49, 379, June, 1971

  11. Riazi, M. R., Al-Otaibi, G. N., “Estimation of Viscosity of Liquid Hydrocarbon Systems,” Fuel 80, 27-32, 2001

  12. Cullick, A. S., Pebdani, F. N., Griewank, A. K., “Modified corresponding states method for predicting densities of petroleum reservoir fluids,” Ind. Eng. Chem. Res., 28 (3), 340-47, 1989

  13. Moharam, H. M., Fahim, M. A., “Prediction of Viscosity of Heavy Petroleum Fractions and Crude Oils Using a Corresponding States Method,” Ind. Eng. Chem. Res., 34 (11), 4140-44, 1995

  14. Sharma, R., Sunil Goel, S., “Correlation of Viscosity of Coal Liquids,” Ind. Eng. Chem. Res., 36 (9), 3999-4007, 1997

  15. Baltatu, M. E., “Prediction of the liquid viscosity for petroleum fractions,” Ind. Eng. Chem. Proc. Des. Dev., 21 (1), 192-5, 1982

  16. Baltatu, M. E., Ely, J. F., Hanley, H. J. M., “Thermal Conductivity of Coal-Derived Liquids and Petroleum Fractions,” Ind. Eng. Chem. Process Des. Dev., 24 (2), 325, 1985

  17. Baltatu, M. E., Chong, R. A., Huber, M. L., Laesecke, A., “Transport Properties of Petroleum Fractions,” Int. J. Thermophysics, 20 (1), 85-95, 1999

  18. Jacoby, R. H., Yarborough, L., “PVT Measurements on Petroleum Reservoir Fluids and Their Uses,” Ind. Eng. Chem., 59(10), 49, 1967

  19. Twu, C. H., “An Internally Consistent Correlations for Predicting the Critical Properties and Molecular Weights of Petroleum and Coal-Tar Liquids,” Fluid Phase Equil., 16, 137, 1984

  20. Allen, J. C., “A Review of the Properties of Some Oil and Gas Reservoirs,” Oil and Gas J., 51(12), 355, 1952

  21. Cragoe, C. S., “Thermodynamics of Petroleum Products,” Bureau of Standard, U. S. Department of Commerce, Miscellaneous Publication, No. 97, 22, 1929

  22. Roess, L. C., “Determination of Critical Temperature and Critical Pressure of Petroleum Fractions by a Flow Method,” J. Soc. Pet. Tech. (London), 22, 665, 1937

  23. Lenoir, J. M., Hipkin, H. G., “Measured enthalpies of eight hydrocarbon fractions,” J. Chem. Eng. Data, 18 (2), 195-202, 1973

  24. Moharam, H. M., Braek, A. M., Fahim, M. A., “A Simple Method of Estimating the Enthalpy of Petroleum Fractions,” Ind. Eng. Chem. Res., 37 (12), 4898-4902, 1998

  25. Filipe A. Z., Da Silva Lopes, V., Kontogeorgis, G. M., “Approach Suitable for Screening Estimation Methods for Critical Properties of Heavy Compounds,” Ind. Eng. Chem. Res., 45 (1), 476-480, 2006

  26. Jianzhong, Z., Biao, Z., Suoqi, Z., Renan, W., Guanghua, Y., “Simplified Prediction of Critical Properties of Nonpolar Compounds, Petroleum, and Coal Liquid Fractions,” Ind. Eng. Chem. Res., 37 (5), 2059-60, 1998

  27. Brule, M. R., Lin, C. T., Lee, L. L., Starling, K. E., “Multiparameter corresponding-states correlation of coal-fluid thermodynamic properties,” AIChE J., 28 (4), 616-25, 1982

  28. Wilson, G. M., Johnston, R. H., Hwang, S. C., Tsonopoulos, C., “Volatility of coal liquids at high temperatures and pressures,” Ind. Eng. Chem. Proc. Des. Dev., 20 (1), 94-104, 1981

  29. Tsonopoulos, C., Heidman, J. L., Hwang, S. C., Thermodynamic and Transport Properties of Coal Liquids, New York, 1986

  30. Whitson, C. H., “Characterizing hydrocarbon plus fractions,” Soc. Pet. Eng. J. 23, 4, 683-694, 1983

  31. Panuganti, S. R., Vargas, F. M., Chapman, W. G., Property Scaling Relations for Nonpolar Hydrocarbons, Ind. Eng. Chem. Res., 2013, 52, 8009-802

  32. Lydersen, A. L., Greenkorn, R. A., Hougen, O. A., Generalized Thermodynamic Properties of Pure Fluids, University of Wisconsin, Engineering Experimental Station, Report 4, Madison, Wisconsin, October, 1955

  33. Lydersen, A. L., “Estimation of Critical Properties of Organic Compounds by the Method of Group Contributions,” University of Wisconsin, Engineering Experimental Station, Report 3, Madison, Wisconsin, April, 1955

  34. Christian Ihmels, E., “The Critical Surface,” J. Chem. Eng. Data, 55 (9), 3474-3480, 2010

  35. Sovova, H., Galushko, A. A., Stateva, R. P., Rochova, K., Sajfrtova, M., Bartlova, M., “Supercritical fluid extraction of minor components of vegetable oils: β-Sitosterol,”
    Journal of Food Engineering, 101(2), 201-209, 2010

  36. Freitas, S.V.D., E Silva, F.A., Pastoriza-Gallego, M. J., Piñeiro, M. M., Lima, A. S., Coutinho J. A. P., “Measurement and prediction of densities of vegetable oils at pressures up to 45 MPa,” J. Chem. Eng. Data, 58 (11), 3046-53, 2013

  37. Poling, B. E., Prausnitz, J. M., O’Connell, J. P., The Properties of Gases and Liquids, (5th ed.) McGraw-Hill, New York, 2001

  38. Walas, S. M., Phase Equilibria in Chemical Engineering, Butterworth Publishers, Boston, 1985