2006 Spring Meeting & 2nd Global Congress on Process Safety
(242c) Granular temperature in a gas fluidised bed
Authors
Biggs, M. J. - Presenter, Institute for Materials and Processes
Glass, D. - Presenter, Institute for Materials and Processes
Koenders, M. (. - Presenter, Kingston University
Xie, L. - Presenter, Loughborough University
Zivkovic, V. - Presenter, Institute for Materials and Processes
Contradictory evidence over the role of bubbles in inducing particle velocity fluctuations has been presented in the literature ? are bubbles required to induce particle velocity fluctuations in gas FBs or not? Applying the non-intrusive method of diffusing-wave spectroscopy (DWS) to a gas fluidised bed of particles whose minimum bubbling velocity is ~5 times that of the minimum fluidisation velocity, it is shown that bubbles are not necessary. Fluctuations are first observed at or just above fluidisation and increase in magnitude with superficial velocity. The distribution of velocity fluctuations in the bed is also presented. They are symmetrical about the centreline where they are maximal and increase with height above the distributor. Finally, we present and discuss the voidage dependent factor, f(θ), in the relationship proposed long ago by G.K. Bachelor relating the superficial velocity and the velocity fluctuations. This function increases sharply from near zero as the voidage exceeds θ ≈ 32% to a maximum around θ ≈ 40% from which it tails off to zero at θ ≈ 52%.