2022 Annual Meeting

(485h) Process Design and Operation for the Flexible Electrification of Methanol Synthesis

Authors

Ma, J. - Presenter, Uw-Madison
Rebarchik, M., Oregon State University
Mavrikakis, M., University of Wisconsin - Madison
Huber, G., University of Wisconsin-Madison
Zavala, V., University of Wisconsin-Madison
The US chemical industry consumes roughly 7,000 trillion BTU of energy annually, accounting for more than 10% of total energy consumption in 2018 [1]. Avoiding generating carbon dioxide during the production of feedstocks (such as hydrogen) is key for mitigating the carbon footprint of the chemical industry [2]. It is estimated that the global warming potential (GWP) of producing one kg of hydrogen by methane steam reforming is 11.8 CO2-equivalent kg [3]. Instead of using steam reforming, sourcing hydrogen from splitting water by using renewable electricity enables reduction of carbon emissions.

Producing chemical feedstocks from renewable (e.g., wind/solar) electricity paves the way to decarbonization. Moreover, this is one of the most promising methods for helping balancing the supply and demand of the power grid [4,5]. For example, using electrolyzers, electricity can be used to spilt water and synthesize hydrogen, which can then be used as a feedstock for chemical production. Using electricity through water electrolysis and synthesizing hydrogen together with CO/CO2/N2 into gaseous or liquid, enables the integration of electricity and chemical sectors [6]. This Power-to-X concept has been applied to a host of chemical processes including the synthesis of ammonia [7-10], methane [11-14], methanol [15-19], Fischer-Tropsch liquids [20-22], and dimethoxymethane (DME) [23-24]. Unfortunately, techno-economic analysis (TEA) studies show that approach is not cost-competitive with traditional fossil fuel-based methods [24-27]. At present, 60-70% of the current electrolytic hydrogen cost is due to electricity demand [27]. Consequently, the economic viability of these technologies heavily depends on the electricity cost.

In 2020, the average wholesale electricity price in the US was 21.03$/MWh. In the mid regions like Kansas, Oklahoma, and Texas, the average wholesale electricity price was between 13.6-19.04$/MWh [28]. Moreover, electricity markets are quite volatile; for example, the electricity price of the real-time market (RTM) changes widely every 15 mins and negative prices are common [28]. The presence of negative prices implies that facilities can be remunerated for consuming electricity. Low electricity prices, high frequency of negative prices, and the volatile nature of energy markets bring new opportunities to the chemical production systems that require hydrogen as input. To harness these features of the current energy market, we propose a computational framework that facilitates the optimal design and operation of flexible electrification coupled with chemical production systems. The goals of our framework are:

  • Decipher the economic feasibility of retrofitting an existing chemical production system with a flexible electrification unit.
  • Investigate the impact of some key technological and economic parameters on the viability of this strategy.
  • Identify the optimal design and the operation mode of the proposed infrastructure.
  • Reveal the Levelized hydrogen production cost under variable electricity markets.
  • Discuss how should chemical facilities participate in a dynamic electricity market by using flexible electrification.

To achieve these goals, we developed a multi-period linear optimization model that facilitates the optimal sizing and operation of a flexible hydrogen production systems that respond to volatile electricity market signals. We applied this framework to study the economic potential of electrification of methanol synthesis; our analysis reveals that real-time electricity price dynamics provide incentives that make electrification economically viable.

Reference:

[1] EIA, “2018 Manufacturing Energy Consumption Survey,” Surv. Data-Energy Consum. as a fuel. U.S. Energy Inf. Adm., 2021.

[2] Z. J. Schiffer and K. Manthiram, “Electrification and Decarbonization of the Chemical Industry,” Joule, vol. 1, no. 1, pp. 10–14, 2017.

[3] and M. K. M. Spath, Pamela L., “Life cycle assessment of hydrogen production via natural gas steam reforming,” vol. No. NREL, no. TP, pp. 570–27637, 2000.

[4] M. Götz et al., “Renewable Power-to-Gas: A technological and economic review,” Renew. Energy, vol. 85, pp. 1371–1390, 2016.

[5] A. Varone and M. Ferrari, “Power to liquid and power to gas: An option for the German Energiewende,” Renew. Sustain. Energy Rev., vol. 45, pp. 207–218, 2015.

[6] A. Buttler and H. Spliethoff, “Current status of water electrolysis for energy storage, grid balancing and sector coupling via power-to-gas and power-to-liquids: A review,” Renew. Sustain. Energy Rev., vol. 82, no. September 2017, pp. 2440–2454, 2018.

[7] M. Capdevila-Cortada, “Electrifying the Haber–Bosch,” Nat. Catal., vol. 2, no. 12, p. 1055, 2019.

[8] V. Kyriakou, I. Garagounis, A. Vourros, E. Vasileiou, and M. Stoukides, “An Electrochemical Haber-Bosch Process,” Joule, vol. 4, no. 1, pp. 142–158, 2020.

[9] H. Wang, M. Palys, P. Daoutidis, and Q. Zhang, “Optimal Design of Sustainable Ammonia-Based Food-Energy-Water Systems with Nitrogen Management,” ACS Sustain. Chem. Eng., vol. 9, no. 7, pp. 2816–2834, 2021.

[10] H. Wang, P. Daoutidis, and Q. Zhang, “Harnessing the Wind Power of the Ocean with Green Offshore Ammonia,” ACS Sustain. Chem. Eng., vol. 9, no. 43, pp. 14605–14617, 2021.

[11] K. Ghaib and F. Z. Ben-Fares, “Power-to-Methane: A state-of-the-art review,” Renew. Sustain. Energy Rev., vol. 81, no. August 2017, pp. 433–446, 2018.

[12] S. H. Jensen et al., “Large-scale electricity storage utilizing reversible solid oxide cells combined with underground storage of CO2 and CH4,” Energy Environ. Sci., vol. 8, no. 8, pp. 2471–2479, 2015.

[13] F. Salomone, E. Giglio, D. Ferrero, M. Santarelli, R. Pirone, and S. Bensaid, “Techno-economic modelling of a Power-to-Gas system based on SOEC electrolysis and CO2 methanation in a RES-based electric grid,” Chem. Eng. J., vol. 377, no. October 2018, p. 120233, 2019.

[14] H. Blanco, W. Nijs, J. Ruf, and A. Faaij, “Potential for hydrogen and Power-to-Liquid in a low-carbon EU energy system using cost optimization,” Appl. Energy, vol. 232, no. September, pp. 617–639, 2018.

[15] H. Zhang and U. Desideri, “Techno-economic optimization of power-to-methanol with co-electrolysis of CO2 and H2O in solid-oxide electrolyzers,” Energy, vol. 199, p. 117498, 2020.

[16] C. Bergins, K. Tran, E. Koytsoumpa, E. Kakaras, T. Buddenberg, and Ó. Sigurbjörnsson, “Power to Methanol Solutions for Flexible and Sustainable Operations in Power and Process Industries Mitsubishi Hitachi Power Systems Europe GmbH , Germany * Carbon Recycling International , Iceland,” pp. 1–18, 2015.

[17] K. F. Tzanetis, J. A. Posada, and A. Ramirez, “Analysis of biomass hydrothermal liquefaction and biocrude-oil upgrading for renewable jet fuel production: The impact of reaction conditions on production costs and GHG emissions performance,” Renew. Energy, vol. 113, pp. 1388–1398, 2017.

[18] C. Hank et al., “Economics & carbon dioxide avoidance cost of methanol production based on renewable hydrogen and recycled carbon dioxide-power-to-methanol,” Sustain. Energy Fuels, vol. 2, no. 6, pp. 1244–1261, 2018.

[19] S. Mbatha, R. C. Everson, N. M. Musyoka, H. W. Langmi, A. Lanzini, and W. Brilman, “Power-to-methanol process: A review of electrolysis, methanol catalysts, kinetics, reactor designs and modelling, process integration, optimisation, and techno-economics,” Sustain. Energy Fuels, vol. 5, no. 14, pp. 3490–3569, 2021.

[20] S. Van Bavel, S. Verma, E. Negro, and M. Bracht, “Integrating CO2Electrolysis into the Gas-to-Liquids-Power-to-Liquids Process,” ACS Energy Lett., vol. 5, no. 8, pp. 2597–2601, 2020.

[21] A. P. Kulkarni, T. Hos, M. V. Landau, D. Fini, S. Giddey, and M. Herskowitz, “Techno-economic analysis of a sustainable process for converting CO2and H2O to feedstock for fuels and chemicals,” Sustain. Energy Fuels, vol. 5, no. 2, pp. 486–500, 2021.

[22] Q. Fu, C. Mabilat, M. Zahid, A. Brisse, and L. Gautier, “Syngas production via high-temperature steam/CO2 co-electrolysis: An economic assessment,” Energy Environ. Sci., vol. 3, no. 10, pp. 1382–1397, 2010.

[23] J. Burre et al., “Comparing pathways for electricity-based production of dimethoxymethane as a sustainable fuel,” Energy Environ. Sci., vol. 14, no. 7, pp. 3686–3699, 2021.

[24] V. Dieterich, A. Buttler, A. Hanel, H. Spliethoff, and S. Fendt, “Power-to-liquid via synthesis of methanol, DME or Fischer–Tropsch-fuels: a review,” Energy Environ. Sci., vol. 13, no. 10, pp. 3207–3252, 2020.

[25] H. Zhang, L. Wang, J. Van herle, F. Maréchal, and U. Desideri, “Techno-economic comparison of green ammonia production processes,” Appl. Energy, vol. 259, no. October 2019, p. 114135, 2020.

[26] A. González-Garay, M. S. Frei, A. Al-Qahtani, C. Mondelli, G. Guillén-Gosálbez, and J. Pérez-Ramírez, “Plant-to-planet analysis of CO2-based methanol processes,” Energy Environ. Sci., vol. 12, no. 12, pp. 3425–3436, 2019.

[27] S. J. Davis et al., “Net-zero emissions energy systems,” Science (80-. )., vol. 360, no. 6396, 2018.

[28] Seel, Joachim, et al. "Plentiful electricity turns wholesale prices negative." Advances in Applied Energy 4 (2021): 100073.