2020 Virtual AIChE Annual Meeting
(475d) Analysis of Membrane Processes for CO2 Removal and H2 Reuse for Solid Oxide Fuel Cells
Authors
Herein, a process analysis was done on using the developed membrane for an SOFC system. First, due to its wide availability, air was used as the sweep gas. Furthermore, a vacuum was proposed for the permeate side to further enhance the driving force and allow for CO2 capture. Also, as oxygen is absent, amine-containing membranes with better transport performances could be used for the vacuum process at 120°C. At 99% H2 recovery, the air sweep process was estimated to remove 44.7% of CO2 from the recycled anode exhaust, whereas the vacuum process could boost the removal to 76.9%. A less stringent H2 recovery requirement could yield a higher CO2 removal. For instance, a CO2 removal of over 90% could be achieved when the H2 recovery was relaxed to 96.7% for the vacuum operation. In addition, a high-level techno-economic analysis was conducted, without including the H2 reused value. The CO2 removal costs corresponding to the air sweep and vacuum processes were $62.9/tonne and $53.3/tonne, respectively, even with the added cost of the vacuum pump for the amine membrane process. The cost is even lower at $35.4/tonne if the captured CO2 is utilized for enhanced oil recovery.