2020 Virtual AIChE Annual Meeting
(352d) Phenomenological Theory of Computation By Vdw Cubic Equation of State Free of Thermodynamic Derivatives in the Estimation of First and Second Order Derived Property Functions
Computation of first- and second-order PVT derivatives of thermodynamic properties from VdW cubic equations is very challenging because PVT derivatives exposed the imperfections of the cubic equations of states. The first-order PVT derivatives are performed for the estimation of enthalpy (partial derivatives (âH/âT)P and (âH/âP)T), enthalpy of vaporization, entropy, entropy of vaporization, internal energy, adiabatic reversible process (âT/âV)S and Joule effect (âT/âV)U while the second-order PVT derivatives are performed for estimation of isochoric and isothermal heat capacities, sound speed (or sonic velocity), Joule-Thomson coefficient, Joule-Thomson inversion point, Gibbs energy and Helmholtz energy functions. Interrelations of those derived properties usually involve derivatives, of which those involving P, v, and T are the most easily obtained while other required derivatives are based on T, P, S, and the three derivatives most susceptible of measurement are: (âv/âT)P, (âv/âp)T, and CP = (âH/âT)P.
But, the foundation for the new approach is based on the forgotten theory of dimensionless thermodynamic function (see Table I) first introduced in 1963 and 1967 by John McKetta and his Students [1-2]. The derived properties computed from PVT data are obtained in the form of deviations of the properties from ideal behavior. While the thermodynamic properties of a substance in the ideal gas state can be calculated by using the methods of statistical mechanics [28-29], here the ideal gas state is computed by Lemmon fundamental equation and equated to critical point in Eq. 3. The derivation of the expressions relating the functions of Table I to the compressibility factor, pressure, and temperature has been presented in detail by Heichelheim and McKetta [1-2] while the ideal gas-state computed by McKetta group is used in PVT relation of Table I to estimate the individual thermodynamic properties.
As opposed to the McKetta method, the approach here is described by Eqs.1-4.
Thus, in the PVT equation of state of the functional form
P = f (R, V, T, x, a, b)....................................................................................................(1)
where a and b are Van der Waals parameters, R denotes gas constant, V denotes molar volume, T denotes temperature and x denotes composition
While in the thermodynamic property equation of the functional form
P = f (Rvdw, Ï, T, x, a, b), where Ï = H, S, U, Cp, Cv, w, µJT, G, A.................................................................(2)
Where x denotes substance composition, w is sound speed and µJT is the Joule-Thomson coefficient while Cp and Cv respectively denotes isothermal and isochoric heat capacities; H denotes enthalpy, S denotes entropy, and U denotes internal energy. The thermodynamic relation use in the functional form of Eq. 2 to establish the van der Waals gas-constant Rvdw is defined as (superscript c denotes critical point):
Rvdw = (Pc Ïc / Zc Tc)
The gas-liquid critical properties for the respective thermodynamic property is obtained from the following PVT relations (subscript std. denotes standard condition while crtpt. denotes critical point and superscript o denotes ideal gas state)
(P Ïo / Z T)std. = (Pc Ïc / Zc Tc)crtpt ................................................................................(3)
The thermodynamic property (Ï) equation of state is an adaptation of the LLS cubic equation (α and β are substance-dependent),
P = Rvdw T/ (Ï â b) â a(T)/ [Ï2 + αbÏ â βb2] ...................................................................(4)
The Van der Waals cubic equations of state used to accomplish the task of this poster consists of two-parameter version (Van der Waals, Soave-Redlich-Kwong, and Peng-Robinson), three-parameter version (Schmidt-Wenzel, Harmens-Knapp, and Patel-Teja) and four-parameter version (Lawal-Lake-Silberberg (LLS), Trebble-Bishnoi). The analysis of results shows the four-parameter cubic equations of state produce accurate results than other versions of the Van der Waals theory of cubic equations of state. The advantage of using the functional model of Eq. 2 in the way of none derivatives supports the analysis reported by Gregorowicz, et al. [33] who stated that taking derivatives exacerbate cubic equation model weaknesses and departure (or derived) functions established with the derivatives of EoS models lead to considerable errors.
Table I. Dimensionless Functions for Deviation of Thermodynamic Properties from Ideal Gas Behavior
Function Dimensionless Form
Volume P(V â Vo)/ RT
Internal energy (U â Uo)/ RT
Enthalpy (H â Ho)/ RT
Entropy (S â So)/ R
Gibbs free energy (G â Go)/ RT
Helmholtz free energy (A â Ao)/ RT
o indicates property of an ideal gas
References
[1] Heichelheim, H. R., McKetta, J. J., Thermodynamic Properties of 2, 2-dimethylpropane (neopentane). Chem. Eng. Progr. Symp. Ser. Vol. 59, No. 44, 23-29, 1963
[2] Moreland, M. P., McKetta, J. J., Silberberg, I. H. Thermodynamic properties of 2-propanol, J. Chem. Eng. Data, 12(3), 366-368, 1967
[3] Martin, J. J. The Thermodynamic Behavior of the Real Ideal Gas. Chem. Eng. Progr. Symp. Ser. Vol. 59, No. 44, 120-126, 1963
[4] Reid, C. E., Principles of Chemical Thermodynamics, Reinhold Publishing Corp., New York, 1960, pp. 249-259
[5] Edmister, W. C., Applied Hydrocarbon Thermodynamics, Gulf Publishing Company, 1962
[6] Hakala, R. W. A Method for Relating Thermodynamic First Derivatives. J. Chem. Edu. 41(2), 99-101, Feb. 1964
[7] Carroll, B. On the use of Jacobians in thermodynamics, J. Chem. Edu. 42 (4), 218-221, 1965
[8] Callen, H. P., Thermodynamics, Wiley, New York, 1960, chap. 8
[9] Shaw, A. N. The Derivation of Thermodynamical Relations for a simple system. Phil. Trans. Roy. Soc. London, A234, 299-328, 1935
[10] Sherwood, T. K., Reed, C. E. Mathematics in Chemical Engineering, McGraw-Hill, 1939
[11] Dodge, B. F. Chemical Engineering Thermodynamics, (1st ed.), McGraw-Hill, New York, 1944
[12] Guggenheim, E. A., Thermodynamics, North-Holland Publishing Co., Amsterdam, 1957
[13] Hougen, O. A., Watson K. M., Chemical Process Principles, Part II, John Wiley and Sons, Inc., New York, 1947, pp. 465-71
[14] Chao, K. C., Greenkorn, R. A. Thermodynamics of Fluids, Dekker, New York, 1975
[15] Bett, K. E., Rowlinson, J. S., Saville, G., Thermodynamics for Chemical Engineers, MIT Press, Cambridge, Massachusetts, 1975, pp. 172-174
[16] Van Ness, H. C., Abbott, M. M. Classical Thermodynamics of Nonelectrolyte Solutions, McGraw Hill, New York, 1982
[17] Walas, S. M. Phase Equilibria in Chemical Engineering, Butterworth, Boston, 1985
[18] Daubert, T. E. Chemical Engineering Thermodynamics, McGraw-Hill, New York, 1985
[19] Tassios, D. P., Applied Chemical Engineering Thermodynamics, 1992
[20] Smith, J. M., Van Ness, H. C., Abbott, M. M. Introduction to Chemical Engineering Thermodynamics, (5th ed.), McGraw-Hill, New York, Chapters 11â14, 1996
[21] Smith, J. M. Van Ness, H. C., Abbott, M. M., Swihart, M. T. Introduction to Chemical Engineering Thermodynamics, (8th ed.), McGraw-Hill, New York, 2018,
[22] Winnick, J. Chemical Engineering Thermodynamics, Chapters 11â14, Wiley, New York, 1997
[23] Elliott, J. R., Lira, C. T. Introductory Chemical Engineering Thermodynamics, Prentice Hall, Upper Saddle River, N.J., 1999
[24] Sandler, S. Chemical and Engineering Thermodynamics, 3d ed., Wiley, Chapters 6, 7 and 8, 1999
[25] Prausnitz, J. M., Lichtenthaler, R. N., Azevedo, E. G. Molecular Thermodynamics of Fluid-Phase Equilibria, (3th ed.), Prentice Hall, 1999
[26] OâConnell, J. P., J. M. Haile: Multicomponent Thermodynamics: Fundamentals for Applications, Cambridge University Press, 2000
[27] Poling, B. E., Prausnitz, J. M., OâConnell, J. P. The Properties of Gases and Liquids, (5th Ed) McGraw-Hill, New York, 2001, chapters 6, 7, 8
[28] Carter, A. H. Classical and Statistical Thermodynamics. Upper Saddle River, NJ, Prentice-Hall: 2001
[29] Dahm, K. D., Visco, D. P. Fundamentals of Chemical Engineering Thermodynamics, Publisher: Timothy Anderson, 2015
[30] Farah, N., Missen, R. W. The Computer-Derivation of Thermodynamic Equations Part I. First and Second Derivatives for Simple Systems, Can. J. Chem. Eng. 64 (1), 154-157, 1986
[31] Farah, N., Missen, R. W. The Computer-Derivation of Thermodynamic Equations Part II. First and Second Derivatives for Complex Unrestricted Systems, Can. J. Chem. Eng. 65 (1), 137-141, 1987
[32] Thorade, M., Saadat, A. Partial Derivatives of Thermodynamic State Properties for Dynamic Simulation. Environmental Earth Sciences 70 (8), 3497-3503, 2013
[33] Gregorowicz, J., OâConnell, J. P., Peters, C. J. Some Characteristics of Pure Fluid Properties that Challenge Equation-of-State Models, Fluid Phase Equil. 116, 94, 1996