2018 AIChE Annual Meeting

Session: Poster Session: Transport and Energy Processes

Poster session for the Transport and Energy Processes Division

Chair

Haider Al-Rubaye, Missouri Science and Technology

Presentations

03:30 PM

(378ad) The Effect of Aluminum Short-Range Ordering on Carbon Dioxide Adsorption in Zeolites
John Findley
(378b) Improving Electrode Performances for Air-Cathode Microbial Fuel Cells
Shi-Chern Yen, Yu-Chieh Huang
(378m) Conversion from CO2-Containing Flue Gas to Electrocatalysts
Seoyeon Baik, Bong Lim Suh, Ayeong Byeon, Jihan Kim, Jae Lee
(378al) A Macroscopic Model Accounting for the Composite Effects for an Ion Lithium Cell with a LiFePO4 Cathode
Ilda Santos, Carlos Omar Castillo-Araiza, Ignacio Gonzalez, Jorge Vazquez-Arenas
(378c) Solar Hybrid Power Systems for Improved Electrical Delivery in Low Humidity, High Temperature Conditions
Mounir Bouzguenda, Aly A Aboulnaga, Gafar Elamin, Kenneth L. Roberts
(378k) Quantified Investigation of Coal Ash Fusion Behavior for Gasifier Design and Operation
Jin Bai, Lingxue Kong, Xiaoming Li
(378j) Concept to Commercialization: Energy efficient & Eco-friendly Anode Grade Coker Technology
Satyen Kumar Das, T.H.V.D. Prasad, Pradeep P.R., Madhusudan Sau, Debasis Bhattacharyya, S.K. Majumdar, S. S. V. Ramakumar
(378l) Molecular Insight into the Growth of Hydrogen and Methane Binary Hydrates
Zhengcai Zhang
(378am) Research of the Vertical Falling Film Behavior in the Scrubbing-Cooling Tube
Yifei Wang, Xin Peng, Liucheng Yan, Guangsuo Yu, Fuchen Wang
(378v) Energy Optimization By Installation of Heat Recovery Steam Generator at Exhaust Gases of Gas Turbine Driven Compressor (Engro Fertilizers Limited)
Kashif Jameel, Sannan Aleem, Bilal Mustafa
(378h) Thermal Distribution on a Heating FLAT Plated Cooled with a Swirling Impinging Jet
Smith Eiamsa-ard, K. Kunnarak, K. Wongcharee, V. Chuwattanakul
(378i) Periodically FULLY Developed Laminar FLOW and HEAT Transfer Characteristics in Tubes Inserted with Rectangular-CUT Twisted Tapes
Smith Eiamsa-ard, V. Kongkaitpaiboon, A. Saysroy, K. Wongcharee, V. Chuwattanakul, M. Pimsarn
(378o) The Effect of Micro and Nano Material on Critical Heat Flux (CHF) Enhancement
Jamal Al-Rubaye, Enas Sharef
(378w) Understanding the Single Pass Operation of Vrfb and the Associated Mass Transfer Loss
Raghunathan Rengaswamy, Deepa Elizabeth Eapen
(378t) Experimental Optimization of Design Parameters of Cylindrical PEM Fuel Cell and Diagnosis of Its Performance Degradation
Suseendiran S. Ravichandran, Samuel Pearn-Rowe, Raghunathan Rengaswamy
(378ag) High Energy Density Energy Storage System Composed of Electrolyzer, Metal Hydride, and Fuel Cell
Gwangwoo Han, Sungbaek Cho, Joongmyeon Bae, Joongbae Kim, Yongkeun Kwon
(378a) Effect of Shear Rate and Drying Speed in Lithium Ion Battery Slurry Processing
Renee Saraka, Samantha Morelly, Maureen Tang, Nicolas J. Alvarez
(378af) A Combined Adsorbent Bed and Pellet Model for Adsorptive Hydrogen Storage
Palla Sridhar, Niket Kaisare
(378d) Lithium Iron Phosphate-Graphene Composite Cathode Materials for Lithium Ion Battery with Improved Rate Capability
Manik Biswas, Ju-Won Jeon
(378ak) Humidity Tracking By Mixing Dry and Humidified Gases with Internal Model Control for PEM Fuel Cells
Sathish Swaminathan, Srinivasan Raman, Raghunathan Rengaswamy
(378e) Comparative Study of Graphene/Water Nano-Fluid in a Heat Exchanger System: Modelling and Simulation
Akshya Khandelwal, Devendra Purbia, Arvind Kumar Sharma
(378f) Electrochemical Studies of Low Temperature Ionic Liquid-Cosolvent-Salt Electrolyte Systems
Wendy J. Lin, Yifei Xu, Marisa E. Gliege, Zuofeng Zhao, Hongyu Yu, Lenore L. Dai
(378x) CZTS (Cu2ZnSnS4) Electrode for Solar Rechargeable Polysulfide Bromide Redox Flow Battery
Animesh Mondal, James G. Radich
(378ah) Heat and Mass Transfer of Complex Metal Hydride Hydrogen Storage Reactor with Improved Heat Exchange System: Modelling and Simulation
Sibusiso E. Mavuso, Andrei V. Kolesnikov, Thabang Ntho
(378q) Direct Power Generation from Reed Biochar in a Direct Carbon Fuel Cell
Jun Wang, Yongdan Li
(378r) A LaNi0.9Co0.1O3 Coated Ce0.8Sm0.2O1.9 Composite Anode for Solid Oxide Fuel Cells Fed with Methanol
Tian Gan, Yongdan Li
(378ai) A Symmetrical Solid Oxide Fuel Cell with a-Site Sodium Doped Perovskite Electrode Materials
Tongtong Yao, Yongdan Li
(378ab) Enhancing the Stability of High-Voltage Lithium-Ion Battery Using Sulfur-Containing Electrolyte Additives
Xiaoying Yu, Chao Shang, Qi Wang
(378g) Stability of Oil-in-Water Emulsions of Heavy Crude Under Flowing Conditions
Yue Cui, Qiyu Huang, Jiadi Zhao, Weidong Li, Caoding Wang
(378s) Effect of Geometry, Gas Flow Rates, and Oxygen Concentration on the Performance of Anode-Supported Planar SOFCs
Nayan Biswas, Deepra Bhattacharya, Jayanta Mukhopadhyay, Rajendra Nath Basu, Prasanta Kumar Das
(378y) Cuprous Bromide: An Examination of High Halide Copper Electrodeposition and Its Application in a Flow Battery
Elizabeth A. Stricker, Robert F. Savinell, Jesse S. Wainright
(378aa) Highly Selective Electroreduction of Carbon Dioxide into Fuels with High Current Density on Mesostructured Copper Oxide-Derived Inverse Opals
Thuy-Duong Nguyen-Phan, Douglas Kauffman, Yang Yu, Yunyun Zhou, Bret H. Howard, Mengling Y. Stuckman, Paul R. Ohodnicki
(378u) Organic Rankine Cycle Waste Heat Recovery System to Cool the Data Center
M.Toufiq Reza, Russ Tipton
(378n) Composite Electrolytes of Pyrrolidone-Derivatives-PEO Enable to Enhance Performance of All Solid State Lithium-Ion Batteries
Xin Li, Yidong Liu, Yong Min
(378ae) Computational Screening of Hydration Reactions for Thermal Energy Storage: New Materials and Design Rules
Steven Kiyabu, Jeffrey S. Lowe, Alauddin Ahmed, Donald J. Siegel
(378ac) A Molecular Simulation Study for Natural Gas Upgrading through Mixed-Matrix Membranes Formed By PB-1A Organic Cage and a Polymer with Intrinsic Microporosity
Jie Liu, Zeyu Zhao, Jianwen Jiang