2014 AIChE Annual Meeting

Session: Poster Session: Materials Engineering & Sciences (08A - Polymers)

This is the general poster session for the Materials Engineering & Sciences Division. Posters will be divided into separate areas for the division to allow all posters in a similar area to be clustered.

Chair

Robertson, M., University of Houston

Co-Chair

Dorfman, K., University of Minnesota

Presentations

06:00 PM

(226ax) Polar Monomer – Salt Complexes: Ionic Liquid-like Polymers through Simple Blending

Horne, W. J., Bara, J. E., Shannon, M. S., Whitley, J. W.

(226bi) Polyurethane/Polysiloxane Hybrid Nanocomposite Coating for Aircraft Applications

(226af) Designing Hydrophilic, Reactive Polymers for CO2 Capture and Acid Gas Transport

Wallace, D. A., Moon, J., Bara, J. E.

(226au) Ab-Initio Crystallization of Alkanes: Structure and Kinetics of Nuclei Formation

Zerze, H., McHugh, A. J., Mittal, J.

(226aa) Temperature-Triggered Shape Transformations in Layer-By-Layer Microtubes

Sung, C., Ajay, V., Hearn, K., Lutkenhaus, J.

(226ai) The Phase Composition and Lamellar Morphology of Linear and Branched Polyethylene: Morphology Interpretation of TD-NMR and SAXS Studies over Broad Range of Crystallinity

Pokorny, R., Chmelar, J., Schneider, P., Kosek, J.

(226i) X-Ray Microtomography of Lithium Dendrite Growth through Polystyrene-Block-Poly(ethylene oxide) Copolymer Electrolyte Membranes

Harry, K., Balsara, N. P.

(226bc) Mechanical Properties of Porous Polymer Separator for Lithium-Ion Batteries

Gor, G., Cannarella, J., Liu, X., Leng, C., Prevost, J. H., Arnold, C. B.

(226aw) Lithium Dendrite Growth through Polymer Electrolyte Membranes

Harry, K., Balsara, N. P.

(226c) Polymerized Ionic Liquid Block Copolymers As Solid-State Polymer Electrolytes for Lithium-Ion Batteries

Elabd, Y. A., Nykaza, J.

(226an) Atomistic Descriptors of Material Properties

(226bq) Structure-Property Relationships of Polyhydroxyurethane and Polyhydroxyurethane/Polyurethane Hybrid Elastomers

Leitsch, E. K., Heath, W., Torkelson, J. M.

(226h) Synthesis of Well-Defined Poly (Styrene-block-Methyl methacrylate) Copolymers By Classical Anionic and Controlled Radical Polymerization (CRP) Methods

Hanazumi, V., Ciolino, A. E., Ressia, J. A., Vallés, E. M.

(226t) Melt Spinning of Thermotropic Liquid Crystalline Pitch: Study of Process Variables

Bermudez, V., Ogale, A.

(226ad) Preparation of in Situ Anti-Sticking Supported Catalysts and Its Applications in Gas-Phase Polymerization

Tu, Y., Zhang, J., Yao, Z., Cao, K., Fu, Q.

(226as) Investigating the Effective Parameters in the Coil-Stretch Transition of High Molecular Weight Polystyrene Under Uniaxial Extensional Flow: A Hi-Fidelity Brownian Dynamics Approach

Saadat, A., Khomami, B.

(226bh) Time Delay of Abnormal Potential Change in Situ Polymerization of Polyaniline on Graphene Oxide Nanosheet

Tang, W., Fan, T., Yuan, C., Tong, S., Mo, S., Zhao, C., Wang, J., Liu, Y., Min, Y.

(226bm) A General Route to Prepare Metal-Organic-Framework Aerogel

Chen, H., Liu, Z., Han, W., Yeung, K. L.

(226bb) Polymer-Based Manufacturing of Microscale Fuel Cells

Hollinger, A. S., Williams, J., Smith, G.

(226ac) Conductive Polyurethane with Different Carbon Filler Nanocomposites for Anticorrosion Application

Ding, D., Wei, H., He, Q., Ho, T. C., Wei, S., Guo, Z.

(226o) Decreasing Polymer Flexibility Improves Wetting and Dispersion of Polymer Grafted Particles in a Chemically Identical Polymer Matrix

Martin, T. B., Jayaraman, A., Lin, B.

(226j) Synthesis and Characterization of a Family of Photosensitive Alternating Copolymers

Fursule, I., Berron, B.

(226m) Electrical Characterization of Sulfonated Poly(Styrene-Isobutylene-Styrene) Triblock Copolymer Thin Films

Rozo, M., Padovani, A.

(226x) Interaction of Comb-Type Copolymers with Long Chain Paraffin in Oil Observed By Epifluorescence Microscopy

Wang, T., Xu, J., Jiang, H., Li, L., Guo, X., Shi, Y.

(226bs) Polymorphism of Precision Halogen Substituted Polyethylenes Studied By Thermal, Microcopy and Spectroscopic Techniques

Zhang, X., Santonja-Blasco, L., Alamo, R. G.

(226p) Sorption in Polyolefins: Equilibria, Diffusion and Morphology

Chmelar, J., Zubov, A., Pokorny, R., Kosek, J.

(226av) Modeling Oxygen Permeability in Biodegradable Polymer Films

McDonnell, M., Greeley, D., Kit, K., Keffer, D.

(226n) Pattern Density Multiplication of Block Copolymer Directed Self-Assembly Using a Chemoepitaxial Guiding Underlayer with Topography

Nation, B., Peters, A. J., Lawson, R. A., Ludovice, P. J., Henderson, C. L.

(226d) Alkaline Fuel Cell Performance with a Polymerized Ionic Liquid Block Copolymer As the Anion Exchange Membrane

Elabd, Y. A., Nykaza, J., Benjamin, R.

(226ah) Atmospheric Plasma-Assisted Chemical Vapor Deposition

(226e) Synthesis and Characterization of Poly(styrene-isobutylene-methyl vinyl ether) for Direct Methanol Fuel Cell Applications

Perez Perez, M., Suleiman, D.

(226bp) Network Structure Analysis of Porous Epoxy Polymers Via Swelling and Glass Transition Behavior

Sharifi, M., Palmese, G. R.

(226bk) Transport Properties of Sulfonated Poly(ether ether ketone) Membranes with Counter-Ion Substitution

Perez Perez, M., Suleiman, D.

(226ba) Crosslinking of a Positive Tone Polynorbornene low-k Dielectric

Schwartz, J. M., Mueller, B. K., Kohl, P. A.

(226bl) Tin Fluorophosphate Microfiber Manufacutred By Melt State Centrifugal Forcespinning

Fang, Y., Herbert, M., Schiraldi, D. A., Ellison, C. J.

(226k) Quantitative Study on Branching Behavior in RAFT Copolymerization of a Vinyl/Divinyl System

Liang, S. N., Wang, W. J., Li, X., Zhu, S., Li, B. G.

(226w) Single Molecule Characterization of Dual-Colored DNA Comb Polymers

Mai, D. J., Marciel, A. B., Schroeder, C. M.

(226at) Thermal Transport in Cross-Linked Natural Rubber Subjected to Uniaxial Elongation

Simavilla, D., Venerus, D.

(226ao) Mathematical Model for Estimation of Heat Insulation Properties of Polymer Foams

Ferkl, P., Kosek, J., Pokorny, R.

(226ak) Solution Copolymerization of Ethylene and Propylene Catalyzed By [O-NS]TiCl3

Xiao, Z. X., Xie, B., Cao, K., Yao, Z.

(226aj) Continuous Growth of Vertically Aligned SBS Via in-Situ Crosslinking in Electrospray

Hu, H., Osuji, C.

(226bf) A Blend Approach to P3HT Based Field Effect Transistor Performance Enhancement Via Inclusion of 2,5‐bis(3‐dodecylthiophen‐2‐yl)Thieno[3,2‐b]Thiophene

Chu, P. H., Zhang, L., Park, J. O., Srinivasarao, M., Briseño, A., Reichmanis, E.

(226br) Polymerization of Castor Oil in Supercritical Carbon Dioxide

Tupper, A. R., Wheelden, B. A., Lee, S.

(226f) Materials Design of Conjugated Block Copolymers for Photovoltaics

(226bj) Confined Crystallization in Biocompatible Polymer Blend Thin Films

Kelly, G., Albert, J.

(226ae) "Schizophyllan" a Novel Polymer for EOR in High Salinity , High Temperature Carbonate Reservoirs: Adsorption Characteristics Over Carbonate Minerals

(226bn) Patterning Thin Polymer Films By Photodirecting the Marangoni Effect Using Photosensitizers

Kim, C. B., Janes, D. W., Katzenstein, J. M., McGuffin, D. L., Ellison, C. J.

(226ab) Development and Characterization of Polyurethane Coatings for Enhanced Anti-Corrosive Properties

Kumar, P., Murthy, K., Murthy, K.

(226be) Long-Range Order in Solutions and Films of Poly(3-hexylthiophene): Role of Self-Assembly and Capillary Flow in Processing

Kleinhenz, N., Reichmanis, E., Nayani, K., Chatterjee, S., Zhang, X., Chang, M., Middlebrooks, J., Park, J. O., Srinivasarao, M., Russo, P.

(226r) Programmed Design and Synthesis of Fluorinated Gradient Copolymer for Photo-Reversibly Switchable Hydrophobic Surface

Zhou, Y. N., Luo, Z. H.