Breadcrumb
- Home
- Publications
- Proceedings
- 2009 Annual Meeting
- Catalysis and Reaction Engineering Division
- Catalytic Hydrogen Generation - General I
- (192g) Decentralized Production of Renewable Hydrogen Based On Ethanol Using Co/CeO2 Catalysts
Different options of ethanol reforming (steam reforming, autothermal reforming and partial oxidation) have been investigated from thermodynamic perspective comparing coking probability, CO-content off reformate and energy requirement per H2 produced. Steam reforming seems to be the best option although more stringent coking boundaries are predicted.
The catalytic process of ethanol steam reforming is more complex than methanol reforming due to the necessity of the C-C bond breakage. Different catalyst systems based on transition metals (Ni, Cu, Co) and noble metals (Rh, Ru, Pt, Ir) supported over a wide range of oxides with different acid-base and redox properties have been proposed in the open literature. The main problem of the catalytic systems is to obtain a good hydrogen selectivity and deactivation due to the formation of carbonaceous deposits.
For this work Co/CeO2 and promoted Co/CeO2 catalysts systems are investigated. Co has been chosen from economical perspective compared to noble metals and CeO2 for its redox properties and known influence to reduce coking. Depending on the operation temperature different coking rates and coke deposits have been observed. At temperatures of 450-500°C strong coke deposits in form of carbon fibers without catalytic deactivation but reactor blocking have been observed.