2005 Annual Meeting

Session: MESD Poster Session

Co-Chair

Elabd, Y. A., Department of Chemical Engineering, Drexel University

Presentations

06:00 PM

(142t) Conformal Coating of Ceramic Nanoparticles Via Atomic Layer Deposition
(142d) Mechanistic Modeling of Nitroxide-Mediated Controlled Radical Polymerization of Gradient Copolymers
(142u) Synthesis & Characterization of Polyimide/ Poss Nanocomposites
(142v) Continuous Flow Microreactor for Chemical Bath Deposition
(142w) Elastic Modulus and Hardness Studies of Single Crystal Zeolites Mfi, Fer, and Cha
(142x) Mechanical and Rheological Properties of Polyalkenoate Cements Designed as Portland Cement Substitutes
(142y) Zeolite Y Coatings on Al-2024-T3 Substrate by a Novel Three-Step Synthesis Method
(142z) Uv-Induced Tunability of Refractive Index for Dielectric Films Via Photoacid-Catalyzed Decomposition of Templated Sacrificial Polymers
(142aa) Hydrothermal Synthesis and Corrosion Resistance of Vanadium Zsm-5 Films
(142ab) Superhydrophobic Conducting Polymer Films: Synthesis and Reversible Wettability
(142ac) Molecular Studies of Proteins Encapsulated in Hydrogels
(142ad) Zeolite a Coatings for Use in Condensing Heat Exchangers Onboard Manned Spacecraft
(142e) The Influence of N-Vinyl Pyrrolidinone on the Photopolymerization Kinetics and Mechanical Properties in Copolymerization with Acrylates with Increasing Functionality
(142bj) Blending Chitosan with Polycaprolactone: Effect on Physicochemical Characteristics and Anti-Bacterial Activity
(142ae) Electroless Deposition of Transparent Conducting Zn2Sno4 for Solar Cell Applications
(142ay) Numerical Modelling of Injection Moulding : Comparisons Using the Phan-Than-Teinner & Criminale-Erickson-Fibley Models
(142af) Impact of Carbon Nanofibers on Cure Kinetics and Viscosity of Vinyl Ester Resin System
(142az) Molecularly Smooth Cellulose Surfaces for Adhesion Studies
(142h) Synthesizing Model Block Copolymers Via Atrp: the Utility of Kinetic Modeling in Guiding Experiments
(142ag) Computer Aided Design for Engineering Elastomers
(142ah) An Investigation of Nickel-Based Amorphous Alloys and Their Corrosion Products
(142ai) Dynamic Modeling of Solid-State Polymerization of Bisphenol a in a Moving Packed Bed Reactor
(142a) Comparisons of Methods to Bond Metal and Chitosan: a Biopolymer for Use as an Implant Coating
(142aj) Morphology, Composition and Thermal Stability of Flame-Made Zirconia-Based Mixed Oxides
(142c) Adhesion and Viability of Liver Cells on Potential Bioreactor Materials
Study of the Pir"Lisis of Organic Residues and Waste Water, for the Light Obtaining of Petroleum
(142ak) The Effect of Filler and Diamine Size on the Fracture Toughness of Alumina Reinforced Epoxy Composites
(142bc) Adsorption and Dissociation Kinetics of Dichlorosilane on Silicon Surface
(142al) Chemical Vapor Deposition Copolymerization of Functionalized Paracyclophanes: an Approach Towards Multivalent Surface Coatings
(142ba) Morphology and Water Barrier Properties of Silane Films: the Effect of Process Parameters
(142be) Characterization and Fabrication of Capillary Flow Networks in Collagen-Based Scaffolds for the Development of Tissue-Engineered Products with Built-in Microvasculature
Evaluation of the Extraction and Swelling of Colombian Coals
(142am) Effects of Template-Monomer Complex Formation on the Synthesis of Molecularly Imprinted Polymers in Aqueous Medium
(142an) Synthesis and Characterization of pH-Sensitive Poly(Ethylene Glycol) -Rich Full Interpenetrated Polymer Networks for Controlled Drug Delivery
Oxidation of Low Rank Colombian Coals with Hno3-Air
(142ao) The Kinetics and Mechanism of Rapid Nickel Oxalate Thermal Decomposition
(142ap) Microinjection Molding of Microstructures - Experimental and Numerical Simulation
(142b) Using Computational Fluid Dynamics to Study and Improve Multihole Schwarz Melt-Blowing Dies
(142bd) Inverted Colloidal Crystals (Icc) Scaffolds as Three Dimensional Microenvironments to Study Cell Interactions in Co-Cultures
(142bh) Nano– and Layered–Morpholgies in Atactic/Syndiotactic Polystyrene Blends
(142aq) Combinatorial Studies of Phase Behavior in Polyanhydride Blends
(142g) Crystallization, Melting, and Dynamic Relaxation Characteristics of Ptt and Ptt Blends
(142au) Real-Time and in-Process Monitoring and Control of Polymerization Processes
(142i) Dynamic Relaxation Characteristics of Crosslinked Poly(Ethylene Glycol) Networks and Composites
(142ar) Polymeric Nano-Porous Materials Prepared Via Interfacial Polymerization in Soft Ionic Liquids
(142k) Reaction Kinetics and Mechanism of Nickel Fiber Synthesis
(142as) Towards Molecular Simulation of Polythiophene Oligomers
(142aw) Experimental Study of Slip Flow in the Semi-Hyperbolically Converging Dies
(142at) Polyimide-Polysiloxane Segmented Copolymers for Fuel Cell Applications
(142j) Assembly of Carbon Tube-in-Tube Nanostructures